Order Products : sales@su-jiao.com
SureSpec HD45-30
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SOs7i9_SureSpec-HD45-30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HD45-30 is a Phillips Process blow molding copolymer certified prime grade designed to meet end-use requirements of containers for packaging of Household Industrial Chemicals (HIC). HD45-30 features easy and consistent processability in conventional continuous or intermittent extrusion equipment. It also offers exceptional ESCR and Impact strength. HD45-30 recommended melt temperature is 180 to 200°C, with the mold at 10 to 20°C. HD45-30 complies with FDA regulation 21CFR 177.1520(c) 3.2(a) and with most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.945 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.35 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (Compression Molded, F50) | > 1000 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 24.1 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 900 | % | ASTM D638 |
| Flexural Modulus 3 | 1040 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | 231 | kJ/m² | ASTM D1822 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Blow Molding Mold Temperature | 10 - 20 | °C | |
| Test Made on injection molded Type 1 tension test specimen according to ASTM D2146 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 180 - 200 | °C |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PVC Film 573 | Teknor Apex Company | PVC, Flexible | PVC Film |
| RTP 1000 HI UV | RTP Company | PBT | RTP |
| Spartech Polycom PP7210 | Spartech Polycom | PP Copolymer | Spartech |
| UNITIKA Nylon 66 A125 | UNITIKA Plastics Division | Nylon 66 | UNITIKA Nylon 66 |
| EMAREX® 300 GF33 | MRC Polymers, Inc. | Nylon 6 | EMAREX® |
