Order Products : sales@su-jiao.com

EMERGE™ PC/ABS 7700

Category:	PC+ABS , Advanced Resin
Manufacturer:	Trinseo
Trademark:	EMERGE™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	SOYPUv_EMERGE-PC-ABS-7700.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

EMERGE™ PC/ABS 7700 Advanced Resin is an ignition-resistant PC/ABS blend that contains no chlorine or bromine additives. It has superior processability for injection molding applications. This grade has excellent aesthetics, is UV stabilized and is available in custom colors.

Main Characteristics:

Tested under ISO 10993 (Parts 5 & 10)

Applications:

Medical equipment housings

Consumer Electronics

Information technology equipment

General Information
Additive	UV Stabilizer
Features	Bromine Free Chlorine Free Flame Retardant Good Processability Pleasing Surface Appearance
Uses	Electrical/Electronic Applications Housings Medical/Healthcare Applications
Appearance	Colors Available
Forms	Pellets
Processing Method	Injection Molding
Multi-Point Data	Specific Heat vs. Temperature (ASTM D3417) Specific Volume vs Temperature (ISO 11403-2) Tensile Creep (ASTM D2990) Tensile Stress vs. Strain (ASTM D638) Thermal Conductivity vs. Temperature (ASTM E1530) Viscosity vs. Shear Rate (ASTM D3835)

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--	1.17	g/cm³	ASTM D792
--	1.18	g/cm³	ISO 1183/B
Melt Mass-Flow Rate (MFR)
230°C/3.8 kg	11	g/10 min	ASTM D1238
260°C/2.16 kg	13	g/10 min	ISO 1133
Molding Shrinkage - Flow	0.40 to 0.60	%	ASTM D955, ISO 294-4

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale, 3.20 mm, Injection Molded)	120		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus
3.20 mm, Injection Molded	2620	MPa	ASTM D638
4.00 mm, Injection Molded	2560	MPa	ISO 527-2/1
Tensile Strength
Yield, 3.20 mm, Injection Molded	60.0	MPa	ASTM D638
Yield, 4.00 mm, Injection Molded	55.0	MPa	ISO 527-2/50
Break, 3.20 mm, Injection Molded	48.3	MPa	ASTM D638
Break, 4.00 mm, Injection Molded	45.0	MPa	ISO 527-2/50
Tensile Elongation
Yield, 3.20 mm, Injection Molded	3.8	%	ASTM D638
Yield, 4.00 mm, Injection Molded	3.8	%	ISO 527-2/50
Break, 3.20 mm, Injection Molded	65	%	ASTM D638
Break, 4.00 mm, Injection Molded	43	%	ISO 527-2/50
Flexural Modulus (3.20 mm, Injection Molded)	2690	MPa	ASTM D790
Flexural Strength (3.20 mm, Injection Molded)	96.5	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-30°C, Injection Molded	15	kJ/m²
23°C, Injection Molded	40	kJ/m²
Notched Izod Impact
-18°C, 3.20 mm, Injection Molded	200	J/m	ASTM D256
-7°C	440	J/m	ASTM D256
23°C, 3.20 mm, Injection Molded	480	J/m	ASTM D256
-30°C, Injection Molded	14	kJ/m²	ISO 180/A
23°C, Injection Molded	50	kJ/m²	ISO 180/A

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load
0.45 MPa, Unannealed	90.6	°C	ASTM D648
0.45 MPa, Unannealed	88.0	°C	ISO 75-2/B
1.8 MPa, Unannealed	79.4	°C	ASTM D648
1.8 MPa, Unannealed	77.0	°C	ISO 75-2/A
Vicat Softening Temperature
--	104	°C	ASTM D1525, ISO 306/A120 3 ¹
--	94.0	°C	ISO 306/B50
CLTE			ASTM D696
Flow : -40 to 40°C	6.8E-5	cm/cm/°C
Transverse : -40 to 40°C	6.8E-5	cm/cm/°C

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	5.2E+15	ohms	IEC 60093
Volume Resistivity	1.0E+18	ohms·cm	IEC 60093
Electric Strength			IEC 60243-1
1.60 mm, in Oil	26	kV/mm
3.20 mm, in Oil	18	kV/mm
Relative Permittivity			IEC 60250
100 Hz	2.86
1 MHz	2.80
Dissipation Factor			IEC 60250
100 Hz	4.0E-3
1 MHz	7.0E-3

Flammability	Nominal Value	Unit	Test Method
Flame Rating ²			UL 94
1.50 mm	V-0
2.00 mm	5VB
2.50 mm	5VA
Glow Wire Flammability Index			IEC 60695-2-12
1.50 mm ³	925	°C
2.00 mm ⁴	925	°C
2.50 mm	925	°C
3.00 mm ⁵	950	°C

Injection	Nominal Value	Unit
Drying Temperature	82.2 to 87.8	°C
Drying Time	3.0 to 4.0	hr
Processing (Melt) Temp	238 to 274	°C
Mold Temperature	60.0 to 90.6	°C

Note Message
1 .	Rate B (120°C/h), Loading 1 (10 N)
2 .	This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
3 .	This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
4 .	This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
5 .	This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.

Resin Grade	Manufacturer	Category	Trademark
RTP ESD C 2700-50A	RTP Company	SEBS	RTP
Purgex™ 461	Neutrex, Inc.	PE, Unspecified	Purgex™
Varcum 29115	Durez Corporation	Phenolic	Varcum
Braskem PP R7051-10N	Braskem Europe GmbH	PP Random Copolymer	Braskem PP
OTECH ALLOY OM5830-Boot	OTECH Corporation	TP, Unspecified	OTECH ALLOY