Order Products : sales@su-jiao.com
ROTOLENE® Black Total Plus
| Category: | LMDPE , Linear Medium Density Polyethylene |
| Manufacturer: | Polimeros Mexicanos S.A. de C.V. |
| Trademark: | ROTOLENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SNtXHa_ROTOLENEBlackTotalPlus.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Linear Copolymer Medium Density Polyethylene, with U.V. stabilizer.8 Available as black powder. Applications: Polyethylene of good quality, for manufacture water tanks, containers and other products that need excellent mechanical and environmental resistance properties with an intense black finished when it's used as an external layer. This compound meets all requirements of US Food and Drug Administration (FDA) as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.930 - 0.940 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.5 - 5.5 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 10% Igepal | 200 | hr | ASTM D1693 |
| 100% Igepal | > 1000 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 18.6 | MPa | ASTM D638 |
| Fracture | 20.0 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 12 | % | ASTM D638 |
| Fracture | > 800 | % | ASTM D638 |
| Flexural Modulus 2 | 690 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Low Temperature Impact (3.18 mm) | 67.8 | J | ARM |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 60.0 | °C | ASTM D648 |
| Additional Information |
|---|
| Mechanical properties determined on rotomolded plaque 1/8 in (3.175mm) |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinpolene MFP14ZA3 | Teknor Apex Asia Pacific PTE. LTD. | PP, Unspecified | Sinpolene |
| EVALENE® LLDPE LF20182 | JG Summit Petrochemical Corporation | LLDPE | EVALENE® LLDPE |
| PEARLSTICK® 45-40/15 | Lubrizol Advanced Materials, Inc. | TPU-Capro | PEARLSTICK® |
| ALCOM® PA66 910/1 AR20 | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® PA66 |
| Monprene® IN-22958D (PRELIMINARY DATA) | Teknor Apex Company | TPE | Monprene® |
