Order Products : sales@su-jiao.com
DuraGrip® DGR 6260CL
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Advanced Polymer Alloys |
| Trademark: | DuraGrip® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SN6Pag_DuraGrip-DGR-6260CL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DuraGrip® 6260CL is a clear Thermoplastic Elastomer (TPE) designed for injection molding and extrusion processes. It has excellent clarity, soft-touch feel, high coefficient of friction, and bonds well to polypropylene. DuraGrip® is not hygroscopic and under normal conditions does not require drying. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.883 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 36 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 60 | ASTM D2240, ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | |||
| 100% strain | 2.28 | MPa | ASTM D412, ISO 37 |
| 300% strain | 3.17 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 6.34 | MPa | ASTM D412, ISO 37 |
| Tensile Elongation (Break) | 610 | % | ASTM D412, ISO 37 |
| Tear Strength 1 | 29.4 | kN/m | ASTM D624 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (190°C, 200 sec^-1) | 114 | Pa·s | ASTM D3835 |
| Additional Information |
|---|
| The value listed as Density -Specific Gravity, ASTM D792, was tested in accordance with ASTM D471.The value listed as Density, ISO 1183, was tested in accordance with ISO 2781. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 170 - 204 | °C |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARCOBLEND 2200 | POLY GIN | PC | MARCOBLEND |
| MTEGRITY™ HDPE HD360 | M. Holland Company | HDPE | MTEGRITY™ HDPE |
| EPO-TEK® 353ND | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Hostaform® LW15EWX | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| Polifor® 12 CA/40 H-D NATURALE Y1 | SO.F.TER. SPA | PP Homopolymer | Polifor® |
