Order Products : sales@su-jiao.com
Thanelene® TPU S80A15 PRTA010 TP305 MSP
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Petropol Industry and Trade of Polymers LTDA |
| Trademark: | Thanelene® TPU |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SMG9nt_Thanelene-TPU-S80A15-PRTA010-TP305-MSP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Thanelene® TPU S80A15 PRTA010 TP305 MSP is a Thermoplastic Polyurethane Elastomer (Polyester) (TPU-Polyester) material. It is available in Asia Pacific, Europe, Latin America, or North America for blow molding, extrusion, or injection molding. |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.22 | g/cm³ | DIN 53479 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 77 to 83 | DIN 53505 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 25.0 | mm³ | DIN 53516 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | DIN 53504 | ||
| 100% Strain | 4.00 | MPa | |
| 300% Strain | 8.00 | MPa | |
| Tensile Strength 1(Yield) | 45.0 | MPa | DIN 53504 |
| Tensile Elongation (Break) | 600 | % | DIN 53504 |
| Tear Strength | 65.0 | kN/m | DIN 53515 |
| Compression Set | DIN 53517 | ||
| 23°C | 25 | % | |
| 70°C | 45 | % |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 110 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 180 | °C | |
| Middle Temperature | 185 | °C | |
| Front Temperature | 170 | °C | |
| Processing (Melt) Temp | 190 to 205 | °C | |
| Mold Temperature | 15.0 to 25.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 110 | °C | |
| Drying Time | 4.0 | hr | |
| Cylinder Zone 1 Temp. | 140 | °C | |
| Cylinder Zone 2 Temp. | 160 | °C | |
| Cylinder Zone 3 Temp. | 170 | °C | |
| Cylinder Zone 4 Temp. | 180 | °C | |
| Melt Temperature | 190 to 205 | °C |
| Note Message | |
|---|---|
| 1 . | 100 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYMAN® (ABS) LP 500 RCP | A. Schulman Europe | ABS | POLYMAN® |
| Razalen® P121 GR30 | Razin™ Engineering Plastics | PP Impact Copolymer | Razalen® |
| Adell Polyamide BR-38 | Adell Plastics, Inc. | Nylon 6 | Adell Polyamide |
| Geon™ Vinyl Rigid Extrusion L6607 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Extrusion |
| Lapex R | LATI S.p.A. | PPSU | Lapex |
