Order Products : sales@su-jiao.com
LNP™ THERMOCOMP™ EC008APQ compound
| Category: | PEI , Polyether Imide |
| Manufacturer: | SABIC Innovative Plastics |
| Trademark: | LNP™ THERMOCOMP™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SL3vsG_LNP-THERMOCOMP-EC008APQ-compound.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LNP THERMOCOMP EC008APQ is a compound based on Polyetherimide containing 40% Carbon Fiber. Added features of this material include: Electrically Conductive, High Flow. Also known as: LNP* THERMOCOMP* Compound EC008APQ Product reorder name: EC008APQ |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | ASTM D792 | ||
| -- | 1.44 | g/cm³ | ASTM D792 |
| -- | 1.43 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (380°C/6.7 kg) | 40 | g/10 min | ASTM D1238 |
| Molding Shrinkage | ASTM D955 | ||
| Flow : 24 hours | 0.010 - 0.050 | % | ASTM D955 |
| Transverse flow : 24 hours | 0.10 - 0.50 | % | ASTM D955 |
| Water Absorption (24 hr, 50% RH) | 0.11 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 112 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| -- 1 | 39400 | MPa | ASTM D638 |
| -- | 35500 | MPa | ISO 527-2/1 |
| Tensile Strength | |||
| Fracture 2 | 268 | MPa | ASTM D638 |
| Fracture | 247 | MPa | ISO 527-2/5 |
| Tensile Elongation | |||
| Fracture 3 | 1.0 | % | ASTM D638 |
| Fracture | 0.90 | % | ISO 527-2/5 |
| Flexural Modulus | |||
| 50.0mm span 4 | 31300 | MPa | ASTM D790 |
| -- 5 | 30600 | MPa | ISO 178 |
| Flexural Stress | |||
| -- | 364 | MPa | ISO 178 |
| Fracture, 50.0mm span 6 | 356 | MPa | ASTM D790 |
| Compressive Strength | 218 | MPa | Internal method |
| Shear Modulus | 4660 | MPa | ASTM C273 |
| Shear Strength | 120 | MPa | ASTM C273 |
| Poisson's Ratio | 0.44 | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 64 | J/m | ASTM D256 |
| 23°C 7 | 6.9 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact | |||
| 23°C | 560 | J/m | ASTM D4812 |
| 23°C 8 | 34 | kJ/m² | ISO 180/1U |
| Instrumented Dart Impact (23°C, Total Energy) | 7.30 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.20 mm) | 193 | °C | ASTM D648 |
| Linear thermal expansion coefficient | ASTM E831 | ||
| Flow : -40 to 150°C | 3.0E-6 | cm/cm/°C | ASTM E831 |
| Lateral : -40 to 150°C | 4.0E-5 | cm/cm/°C | ASTM E831 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 4.5E+2 | ohms | ASTM D257 |
| Volume Resistivity | 4.1E+3 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 - 150 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 380 - 400 | °C | |
| Middle Temperature | 380 - 400 | °C | |
| Front Temperature | 380 - 400 | °C | |
| Processing (Melt) Temp | 380 - 400 | °C | |
| Mold Temperature | 165 - 180 | °C | |
| Back Pressure | 0.300 - 0.700 | MPa | |
| Screw Speed | 50 - 100 | rpm |
| Injection instructions |
|---|
| Injection Speed: 40 - 70 mm/s |
| Note Message | |
|---|---|
| 1 . | 5.0 mm/min |
| 2 . | Type 1, 5.0 mm/min |
| 3 . | Type 1, 5.0 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | 2.0 mm/min |
| 6 . | 1.3 mm/min |
| 7 . | 80*10*4 |
| 8 . | 80*10*4 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEKNIFLEX® PXA 15400 | Tekni-Films, a div of Tekni-Plex | Film, Copolyester/PCTFE | TEKNIFLEX® |
| Fainplast PVC GS 65/T | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| GAPEX® HPP40GR09BK | Ferro Corporation | PP Homopolymer | GAPEX® |
| POLIMAXX AM3245PC | IRPC Public Company Limited | HDPE | POLIMAXX |
| KMI PA KM66-11BLK | KMI Group, Inc. | Nylon 66 | KMI PA |
