Order Products : sales@su-jiao.com
K-Flex 3070
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Technovinyl Polymers India Ltd. |
| Trademark: | K-Flex |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SFmBtX_K-Flex-3070.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
K-Flex 3070 is a Thermoplastic Elastomer (TPE) material. It is available in Africa & Middle East. Important attributes of K-Flex 3070 are:
Typical application of K-Flex 3070: Wire & Cable |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 62 to 72 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | > 8.00 | MPa | ASTM D412 |
| Tensile Elongation (Break) | > 400 | % | ASTM D412 |
| Compression Set | ASTM D395 | ||
| 23°C | 48 | % | |
| 70°C | 59 | % | |
| 100°C | 72 | % |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (100°C, 168 hr) | -10 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (100°C, 168 hr) | -20 | % | ASTM D573 |
| Change in Tensile Strength (100°C, 168 hr, in Oil) | -35 | % | ASTM D471 |
| Change in Ultimate Elongation (100°C, 168 hr, in Oil) | -40 | % | ASTM D471 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | -20 to 100 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 140 to 170 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NEOFLON™ EP-620 | DAIKIN AMERICA, INC. | ETFE | NEOFLON™ |
| NYLOY® UB-0010N G35N4N | Nytex Composites Co., Ltd. | Nylon, Unspecified | NYLOY® |
| Andur 950 AP | Anderson Development Company | PUR-Est/eth,TDI | Andur |
| DuraForm® GF | 3D Systems | Nylon, Unspecified | DuraForm® |
| Sinpolene GPP5625 | Teknor Apex Asia Pacific PTE. LTD. | PP, Unspecified | SINPOLENE |
