Order Products : sales@su-jiao.com
SABIC® LDPE 2404N0
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SCzmLM_SABIC-LDPE-2404N0.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® LDPE 2404N0 is a LDPE tubular grade without additives. The product is typically developed for cast film extrusion applications requiring an optimal relationship between draw down, purity and organoleptic properties. Application SABIC® LDPE 2404N0 is typically suitable for a wide variety of cast film application. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.925 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.2 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (1.10mm, molded) | 250 | MPa | ISO 527-2/50 |
| Tensile Stress (fracture, 1.10mm, molded) | 12.0 | MPa | ISO 527-2/50 |
| Tensile Strain | ISO 527-2/50 | ||
| Yield, 1.10mm, molded | 11 | % | ISO 527-2/50 |
| Fracture, 1.10mm, molded | 800 | % | ISO 527-2/50 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 94.0 | °C | ISO 306/A |
| Melting Temperature (DSC) | 111 | °C | Internal method |
| Enthalpy Change | 134 | J/g | Internal method |
| Additional Information |
|---|
| Mechanical properties have been determined on compression moulded test specimen (1,1 mm thick and 5,0 mm wide) at 50 mm/min. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sevrite™ 3000-80A | Vi-Chem Corporation | TPE | Sevrite™ |
| Sindustris PC GP1001 | Sincerity Australia Pty Ltd. | PC | Sindustris PC |
| AKROMID® A3 GF 60 1 natural (2396) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| Larpeek 10 G/40 | LATI S.p.A. | PEEK | Larpeek |
| OmniLon™ PA6/6 U GR23 BK1000 | OMNI Plastics, LLC | Nylon 66 | OmniLon™ |
