Order Products : sales@su-jiao.com
Greene 965
| Category: | NBR , Acrylonitrile Butadiene Rubber |
| Manufacturer: | Greene, Tweed & Co. |
| Trademark: | Greene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SCxK0I_Greene-965.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Greene 965 is an Acrylonitrile Butadiene Rubber (NBR) product. It is available in North America. |
| General Information | |
|---|---|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.18 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 78 | ASTM D785 | |
| Durometer Hardness (Shore A) | 75 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction 1 | ASTM D1894 | ||
| vs. Itself - Dynamic | 0.20 | ||
| vs. Itself - Static | 1.0 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D1414 | ||
| 50% Strain | 2.90 | MPa | |
| 100% Strain | 6.89 | MPa | |
| Tensile Strength (Break) | 25.4 | MPa | ASTM D1414 |
| Tensile Elongation (Break) | 240 | % | ASTM D1414 |
| Compression Set | ASTM D395 | ||
| 135°C, 70 hr 2 | 15 | % | |
| 135°C, 70 hr 3 | 13 | % | |
| 135°C, 70 hr 4 | 34 | % |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength | ASTM D471 | ||
| 135°C, 70 hr, in MIL-H-5606 | -17 | % | |
| 135°C, 70 hr, in MIL-H-83282 | 6.0 | % | |
| Change in Ultimate Elongation | ASTM D471 | ||
| 135°C, 70 hr, in MIL-H-5606 | 2.0 | % | |
| 135°C, 70 hr, in MIL-H-83282 | -4.5 | % | |
| Change in Durometer Hardness | ASTM D471 | ||
| 135°C, 70 hr, in MIL-H-5606 | -2.0 | ||
| 135°C, 70 hr, in MIL-H-83282 | 0.0 | ||
| Change in Volume | ASTM D471 | ||
| 135°C, 70 hr, in MIL-H-5606 | 14 | % | |
| 135°C, 70 hr, in MIL-H-83282 | 5.5 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | 1.8E-5 | cm/cm/°C | ASTM E228 |
| Service Temperature | -48 to 81 | °C |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rubber Classification 5 | HNBR | ||
| Tear Strength - Bie B | 48.2 | kN/m | ASTM D624 |
| TR 10/50 | -26 | °C | ASTM D1329 |
| Note Message | |
|---|---|
| 1 . | Method C |
| 2 . | in MIL-H-83282 - 25% Deflection |
| 3 . | in MIL-H-5606 - 25% Deflection |
| 4 . | in Air - 25% Deflection |
| 5 . | ASTM D1418 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| T-Blend® 6594B-WGL60 | TSRC Corporation | SEBS | T-Blend® |
| Unipren® Elastomers B3 NTLA010 75A UP311 | Petropol Industry and Trade of Polymers LTDA | PP+EPDM | Unipren® Elastomers |
| Devcon Floor Grip™ | Devcon | Epoxy | Devcon |
| Hyrene® PSCRY 2.5 | Entec Polymers | PS (GPPS) | Hyrene® |
| Maxxam™ X MX5200-8054 FR NC001 | PolyOne Corporation | PP, Unspecified | Maxxam™ |
