Order Products : sales@su-jiao.com
BCC Resins BC 8163
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | BCC Products Inc. |
| Trademark: | BCC Resins |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SCM0fO_BCC-Resins-BC-8163.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| BC 8163 is a very low viscosity, rapid setting, rigid urethane compound. This system will cure quickly to a hard, tough, impact resistant casting. BC 8163 is non-sensitive to moisture after cure and will readily bond to itself if stage pours are required. The one-to-one volume mix ratio makes the system readily adaptable for machine mixing and dispensing. BC 8163 is recommended in applications where a "thermoplastic feel" is desired. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.29 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 78 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Ultimate) | 38.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.5 | % | ASTM D638 |
| Flexural Modulus | 15200 | MPa | ASTM D790 |
| Flexural Strength (Break) | 54.3 | MPa | ASTM D790 |
| Compressive Strength | 27.5 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 80 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 57.2 | °C | ASTM D648 |
| CLTE - Flow | 2.4E-4 | cm/cm/°C | ASTM D696 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 96, Mix Ratio by Volume: 100 | ||
| Resin | Mix Ratio by Weight: 100, Mix Ratio by Volume: 100 | ||
| Pot Life (25°C) | 2.0 to 2.5 | min | |
| Thermoset Mix Viscosity | 150 | cP | ASTM D2393 |
| Demold Time (25°C) | 60 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMSTER PF340S4 | Polyram Ram-On Industries | PBT | RAMSTER |
| RheTech Polypropylene T10UP100-01 | RheTech, Inc. | PP, Unspecified | RheTech Polypropylene |
| SCANAMID 66 A53^ F43 | Polykemi AB | Nylon 66 | SCANAMID 66 |
| ASTALAC™ ABS KJV | Marplex Australia Pty. Ltd. | ABS | ASTALAC™ |
| KOCETAL® K300HUBK | Kolon Plastics, Inc. | Acetal (POM) Copolymer | KOCETAL® |
