Order Products : sales@su-jiao.com
Elastocon® CLR75
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Elastocon TPE Technologies |
| Trademark: | Elastocon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SBQEzc_Elastocon-CLR75.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Elastocon® CLR75 is a transparent thermoplastic elastomer that has been developed for applications that require oil/plasticizer free, non-blooming high strength properties and a tactil surface finish. Elastocon?? CLR75 is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon?? CLR75 can be overmolded onto polypropylene. Elastocon® CLR75 is supplied as ready to use pellets in 1000 lb. quantities. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.890 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 75 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 4.20 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 10.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 500 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 166 - 177 | °C | |
| Front Temperature | 182 - 188 | °C | |
| Nozzle Temperature | 193 - 204 | °C | |
| Mold Temperature | 21.1 - 37.8 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.689 - 1.38 | MPa |
| Injection instructions |
|---|
| Elastocon® CLR40 thermoplastic elastomer compound does not require drying. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | < 79.4 | °C | |
| Cylinder Zone 1 Temp. | 149 - 177 | °C | |
| Cylinder Zone 2 Temp. | 149 - 177 | °C | |
| Cylinder Zone 3 Temp. | 149 - 177 | °C | |
| Cylinder Zone 4 Temp. | 149 - 177 | °C | |
| Cylinder Zone 5 Temp. | 149 - 177 | °C | |
| Die Temperature | 149 - 177 | °C |
| Extrusion instructions |
|---|
| Compression ratio: 2.5 to 3.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 6003-75A | RTP Company | TPE | RTP |
| Sindustris POM HI516W | Sincerity Australia Pty Ltd. | Acetal (POM) Homopolymer | Sindustris POM |
| Wondel® T TM6 | Nanjing Julong Engineering Plastics Co., LTD | PBT | Wondel® T |
| Electrafil® PA6/6 03004 GF20 | Techmer Engineered Solutions | Nylon 66 | Electrafil® |
| PENTAMID B GV15 H RC schwarz | PENTAC Polymer GmbH | Nylon 6 | PENTAMID B |
