Order Products : sales@su-jiao.com
PLUSTEK PD502G6
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | Polyram Ram-On Industries |
| Trademark: | PLUSTEK |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SBAoaH_PLUSTEK-PD502G6.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 30% GLASS FIBER REINFORCED, V-0 1.6mm, POLYAMIDE 12 FOR INJECTION MOLDING APPLICATION. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.67 | g/cm³ | ASTM D792, ISO 1183 |
| Water Absorption | |||
| Saturation | 1.2 | % | ASTM D570 |
| Saturated, 23°C | 1.2 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 7600 | MPa | ASTM D638, ISO 527-2 |
| Tensile Strength (Yield) | 115 | MPa | ASTM D638, ISO 527-2 |
| Tensile Elongation (Break) | 6.0 | % | ASTM D638, ISO 527-2 |
| Flexural Modulus | 7100 | MPa | ASTM D790, ISO 178 |
| Flexural Strength | 185 | MPa | ASTM D790, ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 170 | J/m | ASTM D256 |
| 23°C | 17 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 165 - 175 | °C | ISO 11357-3, ASTM D3418 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.60 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 85.0 | °C | |
| Drying Time | 3.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Rear Temperature | 215 - 255 | °C | |
| Middle Temperature | 220 - 260 | °C | |
| Front Temperature | 225 - 265 | °C | |
| Mold Temperature | 65.0 - 105 | °C | |
| Injection Pressure | 70.0 - 105 | MPa | |
| Injection Rate | Fast | ||
| Holding Pressure | 35.0 - 70.0 | MPa | |
| Back Pressure | 0.350 - 0.700 | MPa | |
| Screw Speed | 60 - 90 | rpm |
| Injection instructions |
|---|
| Fill Speed: 50 to 75 mm/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| THERMOLAST® K TC6CSN (Series: CS) | KRAIBURG TPE | TPE | THERMOLAST® K |
| NILENE® P K10T | Taro Plast S.p.A. | PP Homopolymer | NILENE® |
| Novalloy-S S69P1 | Daicel Polymer Ltd. | PC+ABS | Novalloy-S |
| Lumid® GP2430A(W) | LG Chem Ltd. | Nylon 6 | Lumid® |
| LUVOCOM® 1105-8455 | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
