Perfactory® E-Denstone

Category:	Unspecified , Unspecified
Manufacturer:	EnvisionTEC, Inc.
Trademark:	Perfactory®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	S6UByz_Perfactory-E-Denstone.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
EnvisionTEC's E-Denstone Material was developed for dental model manufacturing. The peach color provides an attractive choice for modeling that is similar in look and feel to common die stones used in labs. It can be used with traditional dental manufacturing methods or as a CAD based model solution. This is the only material that allows you to easily die trim, margin mark with a red pencil and hand wax to the die without concerns for layer lines. Die paint sticks to the dies just like plaster and won't peel off. The material looks and feels like traditional gypsum models, which sets it above the other resin-based models currently on the market. The low viscosity formula combined with high accuracy printers helps to produce superior results with no loss of anatomy detail. E-Denstone is also tough enough for a dental technician to repeatedly remove and replace the die, check occlusion and move through excursions without any loss of fit or causing excessive wear on the contact surfaces. The cleanup does not use messy oils or heat that can cause distortion and takes only 3 minutes. The biggest advantage is its build time - a staggering average build time of under 2.5 hours with a full platform of crown and bridge models. All this with 35 micron resolution in Z. This means the lab is able to complete several builds in an 8 hour shift, allowing for fast turnaround of highly detailed accurate models. Unattended production means the machine can work while you are away. It will even turn itself off after completing a build. Applications Dental Recommended Machines: Perfactory® 4 DDP4 Series, PixCera

Message

EnvisionTEC's E-Denstone Material was developed for dental model manufacturing. The peach color provides an attractive choice for modeling that is similar in look and feel to common die stones used in labs. It can be used with traditional dental manufacturing methods or as a CAD based model solution. This is the only material that allows you to easily die trim, margin mark with a red pencil and hand wax to the die without concerns for layer lines. Die paint sticks to the dies just like plaster and won't peel off. The material looks and feels like traditional gypsum models, which sets it above the other resin-based models currently on the market. The low viscosity formula combined with high accuracy printers helps to produce superior results with no loss of anatomy detail. E-Denstone is also tough enough for a dental technician to repeatedly remove and replace the die, check occlusion and move through excursions without any loss of fit or causing excessive wear on the contact surfaces. The cleanup does not use messy oils or heat that can cause distortion and takes only 3 minutes. The biggest advantage is its build time - a staggering average build time of under 2.5 hours with a full platform of crown and bridge models. All this with 35 micron resolution in Z. This means the lab is able to complete several builds in an 8 hour shift, allowing for fast turnaround of highly detailed accurate models. Unattended production means the machine can work while you are away. It will even turn itself off after completing a build.

Applications
Dental

Recommended Machines:
Perfactory® 4 DDP4 Series, PixCera

General Information
Features	Good Wear Resistance Low Viscosity Outstanding Surface Finish Paintable
Uses	Dental Applications Modeling Material Prototyping
Appearance	Opaque Orange
Forms	Liquid
Processing Method	3D Printing, Stereolithography

Mechanical	Nominal Value	Unit
Tensile Strength	56.0	MPa
Tensile Elongation (Break)	3.5	%
Flexural Modulus	3350	MPa
Flexural Strength	115	MPa

Thermal	Nominal Value	Unit
Heat Deflection Temperature	140	°C

Resin Grade	Manufacturer	Category	Trademark
Adsyl 6 C 30 F	LyondellBasell Industries	Polyolefin, Unspecified	Adsyl
Alkamax® ML2610PN	Qenos Pty Ltd	mLLDPE	Alkamax®
ARNYL PA6 NERO	Daloga srl	Nylon 6	ARNYL
Kingfa PP-V15	Kingfa	PP, Unspecified	Kingfa
Hostaform® WR140LG	Celanese Corporation	Acetal (POM) Copolymer	Hostaform®