Order Products : sales@su-jiao.com
Haysite Plastics ETS
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Haysite Reinforced Plastics |
| Trademark: | Haysite Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | S5HA91_Haysite-Plastics-ETS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A NEMA GPO-1 grade fiberglass mat reinforced thermoset polyester molded sheet. ETS is an IEEE Class B 130°C electrical / 160° C mechanical material with good punching characteristics. Typical applications include transformer spacers and supports. Available in .032" - 2.00". Standard color - Buff. Meets Gov't Specs - LP-509, I-24768/6. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| UL File Number |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.87 | g/cm³ | ASTM D792 |
| Water Absorption (Equilibrium) | 0.60 | % | ASTM D229 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Barcol Hardness | 46 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 68.9 | MPa | ASTM D638 |
| Flexural Modulus | 6890 | MPa | ASTM D790 |
| Flexural Strength | 159 | MPa | ASTM D790 |
| Compressive Strength | 207 | MPa | ASTM D695 |
| Shear Strength | 96.5 | MPa | ASTM D732 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 430 | J/m | ASTM D256 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength (1.59 mm, Oil) | 20 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 60 Hz | 4.80 | ||
| 1 MHz | 4.30 | ||
| Dissipation Factor | ASTM D150 | ||
| 60 Hz | 0.015 | ||
| 1 MHz | 0.011 | ||
| Arc Resistance | 150 | sec | ASTM D495 |
| Dielectric Strength - Step-By-Step In Oil 1 | 54000 | V | ASTM D149 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Resistance | ASTM D229 | ||
| Burning Time | 5.5 | min | |
| Ignition Time | 1.0 | min |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Bond Strength (1.27 cm) | 8.62 | MPa | ASTM D229 |
| Temperature Rating | 130 | °C |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | Parallel |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP PA6 33 GF BLK | RTP Company | Nylon 6 | RTP |
| Alkatuff® 438 | Qenos Pty Ltd | LLDPE | Alkatuff® |
| Evoprene™ COGEE 683 | AlphaGary | SEBS | Evoprene™ COGEE |
| Hangzhou Plastic PET/PVDC/PE | Hangzhou Plastic Industry Co., Ltd. | Film, PET/PVDC/PE | Hangzhou Plastic |
| IROSTIC® S 7614 | Huntsman Corporation | TPU, Unspecified | IROSTIC® |
