Order Products : sales@su-jiao.com
RTP 0399 X 138339
| Category: | PC , Polycarbonate |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | S5DIUu_RTP0399X138339.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Flame Retardant - Transparent |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.21 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.60 - 0.90 | % | ASTM D955 |
| Moisture Content | 0.020 | % |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ignition Resistance - Aerospace Value (762.0 µm) | 2.00 | FAR 25.853 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2140 | MPa | ASTM D638 |
| Tensile Strength | 62.1 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | > 10 | % | ASTM D638 |
| Flexural Modulus | 2410 | MPa | ASTM D790 |
| Flexural Strength | 100 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.20 mm) | 190 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.20 mm) | No Break | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 129 | °C | ASTM D648 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.200 mm | V-2 | UL 94 | |
| 3.0 mm | V-0 | UL 94 | |
| Glow Wire Flammability Index (3.0 mm) | 960 | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature (3.0 mm) | 850 | °C | IEC 60695-2-13 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 | °C | |
| Drying Time | 4.0 | hr | |
| Dew Point | -29 | °C | |
| Processing (Melt) Temp | 288 - 316 | °C | |
| Mold Temperature | 82 - 121 | °C | |
| Injection Pressure | 68.9 - 103 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 285H TFE 13 SI 2 | RTP Company | Nylon 66 | RTP |
| TEDUR® L 9400-1 | ALBIS PLASTIC GmbH | PPS | TEDUR® |
| Amilan® CM1026 | Toray Resin Company | Nylon 6 | Amilan® |
| Generic PBR, High Cis | Generic | PBR, High Cis | Generic |
| Hostacom ERC 213N C12360 | LyondellBasell Industries | PP Copolymer | Hostacom |
