Order Products : sales@su-jiao.com
Andur 9500 AP/Curene® 442
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | S1xnKt_Andur-9500-AP-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 9500 AP/Curene®442 is a polyurethane (polyether, TDI)(PUR-aliphatic/TDI) product,. It is available in North America. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.14 | g/cm³ | ASTM D1505 |
| Molding Shrinkage - Flow | 1.3 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 95 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Compressive Strength | ASTM D695 | ||
| 5% strain | 0.945 | MPa | ASTM D695 |
| 10% strain | 3.61 | MPa | ASTM D695 |
| 15% strain | 5.95 | MPa | ASTM D695 |
| 25% strain | 9.12 | MPa | ASTM D695 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 11.8 | MPa | ASTM D412 |
| 300% strain | 24.5 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 31.1 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 340 | % | ASTM D412 |
| Compression Set | 29 | % | ASTM D395B |
| Bayshore Resilience | 37 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 2.0 - 4.0 | min | |
| Demold Time | 20 - 30 | min | |
| Post Cure Time (96°C) | 16 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore A: 93 to 97Die C Tear, ASTM D1004: 385 pliAverage Split Tear, ASTM D1938: 134 pliStoichiometry Curative Level: 95%Grams Curene 442 per 100 grams Andur 9500 AP: 17.5 to 18.7Mix Temperature: Andur 9500 AP: 180-212°F Curene 442: 235-250°F |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 104 - 113 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AFFINITY™ GA 1875 | The Dow Chemical Company | POP | AFFINITY™ |
| Cheng Yu 3265 | Cheng Yu Plastic Company Limited | TPE | Cheng Yu |
| ELASTOSIL® AUX PRIMER G 3243 | Wacker Chemie AG | Silicone | ELASTOSIL® AUX |
| ELASTOSIL® M 4641 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® M |
| Osterlene® LD-.25-918 | Osterman & Company | LDPE | Osterlene® |
