Order Products : sales@su-jiao.com
Badamid® B70 M30
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Bada AG |
| Trademark: | Badamid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | S12Vgw_Badamid-B70-M30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 30% mineral filled standard injection moulding grade for technical articles with a high demand on dimensional stability |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.35 | -- | g/cm³ | ISO 1183 |
| Water Absorption | ISO 62 | |||
| Saturation, 23°C | 6.7 | -- | % | |
| Equilibrium, 23°C, 50% RH | 2.1 | -- | % |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus (23°C) | 5000 | 2000 | MPa | ISO 527-2/1 |
| Tensile Stress 1(Break, 23°C) | 75.0 | 45.0 | MPa | ISO 527-2/5 |
| Tensile Strain 2(Break, 23°C) | 12 | 40 | % | ISO 527-2/5 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength 3 | ISO 179/1eA | |||
| -30°C | 7.0 | 12 | kJ/m² | |
| 23°C | 9.0 | 16 | kJ/m² | |
| Charpy Unnotched Impact Strength 4(23°C) | No Break | No Break | ISO 179/1eU | |
| Notched Izod Impact Strength 5 | ISO 180/1A | |||
| -30°C | 6.0 | 9.0 | kJ/m² | |
| 23°C | 7.0 | 12 | kJ/m² |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature 6 | ||||
| 0.45 MPa, Unannealed | 195 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 115 | -- | °C | ISO 75-2/A |
| Melting Temperature (DSC) 7 | 222 | -- | °C | ISO 3146 |
| CLTE 8 | ISO 11359-2 | |||
| Flow | 6.5E-5 | -- | cm/cm/°C | |
| Transverse | 6.0E-5 | -- | cm/cm/°C | |
| Maximum Service Temperature | IEC 216 | |||
| 20000 hrs | 100 | -- | °C | |
| some hours | 190 | -- | °C |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity 9 | 1.0E+13 | 1.0E+10 | ohms | IEC 60093 |
| Volume Resistivity 10 | 1.0E+15 | 1.0E+12 | ohms·cm | IEC 60093 |
| Relative Permittivity 11 | 3.50 | 6.10 | IEC 60250 | |
| Dissipation Factor 12 | 0.020 | 0.19 | IEC 60250 | |
| Comparative Tracking Index | 500 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | UL 94 | |||
| 0.800 mm 13 | HB | -- | ||
| 1.60 mm 14 | HB | -- |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Processing (Melt) Temp | 240 to 260 | °C | |
| Mold Temperature | 60.0 to 80.0 | °C |
| Note Message | |
|---|---|
| 1 . | Test Specimen accordng to ISO 3167, Type A |
| 2 . | Test Specimen accordng to ISO 3167, Type A |
| 3 . | 80x10x4 mm |
| 4 . | 80x10x4 mm |
| 5 . | 80x10x4 mm |
| 6 . | 110x10x4 mm |
| 7 . | 10 K/min, Compound for moulding |
| 8 . | >=10x10x4 mm |
| 9 . | 80x80x1 mm |
| 10 . | 80x80x1 mm |
| 11 . | 80x80x1 mm |
| 12 . | 80x80x1 mm |
| 13 . | 125x13x0.8 mm |
| 14 . | 125x13x1.6 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRIBOCOMP® PA66 CF30 TS0 | EPIC Polymers | Nylon 66 | TRIBOCOMP® |
| UBE Nylon 5033 FDX27 | UBE Engineering Plastics, S.A. | Nylon 66/6 | UBE Nylon |
| NOVALAC RX®342 | Vyncolit N.V. | Phenolic | NOVALAC |
| Braskem PP FPT350WV3 | Braskem America Inc. | PP Homopolymer | Braskem PP |
| HAIPLEN H30 G2 BA | Taro Plast S.p.A. | PP Homopolymer | HAIPLEN |
