Order Products : sales@su-jiao.com
WanBlend® WHT-1180M
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Wanhua Chemical Group Co., Ltd. |
| Trademark: | WanBlend® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RzEboG_WanBlend-WHT-1180M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
WHT-1180M TPU are polyester- based TPU, supplied in form of natural color, white or black pellets with high tear strength, outstanding abrasion resistance, and low temperature flexibility. Its product has silky matt surface. Applications: wire and cable hose & tube, belt and film & sheet. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.16 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 79 to 85 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 4.90 | MPa | |
| 300% Strain | 8.60 | MPa | |
| Tensile Strength | 17.8 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 650 | % | ASTM D412 |
| Tear Strength | 80.1 | kN/m | ASTM D624 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 to 110 | °C | |
| Drying Time | 4.0 | hr | |
| Cylinder Zone 1 Temp. | 160 | °C | |
| Cylinder Zone 3 Temp. | 170 | °C | |
| Cylinder Zone 5 Temp. | 180 | °C | |
| Die Temperature | 165 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tarnoform® 300 TF4 | Grupa Azoty S.A. | Acetal (POM) Copolymer | Tarnoform® |
| NEFTEKHIM PE 4430S (30405) | Nizhnekamskneftekhim Inc. | LLDPE | NEFTEKHIM PE |
| FHR EPS 40-5640 | Flint Hills Resources, LP | PS (EPS) | FHR EPS |
| HiFill® PA4/6 GF30 HS NAT | Techmer Engineered Solutions | Nylon 46 | HiFill® |
| Latilub 62-01M G/30 | LATI S.p.A. | Nylon 6 | Latilub |
