Order Products : sales@su-jiao.com
Akoalit PB 4268 White
| Category: | PB , Polybutylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Akoalit |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Ryq3M4_Akoalit-PB-4268-White.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Akoalit PB 4268 white is a premium highly isotactic polyolefin manufactured from butene-1 monomer. The product provides excellent long term hydrostatic strength also at elevated temperatures combined with high flexibility. Akoalit PB 4268 complies with requirements specified in ISO 15876, ISO 12230, DIN 16968/DIN 16969 and many other National Standards for PB-1 pipe applications. The grade is typically used for high-performance extrusion into pipe and injection moulding into fittings for potable hot and cold water distribution applications where improved organoleptic properties are required. Akoalit PB 4268 is available in white colour in pellet form. Akoalit PB 4268 is not being sold for pipe applications in North America. The grade is not intended for medical or pharmaceutical applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.925 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.60 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | ISO 8986-2 | ||
| Yield, molding | 20.0 | MPa | ISO 8986-2 |
| Fracture, molding | 35.0 | MPa | ISO 8986-2 |
| Tensile Strain 2(Break, Compression Molded) | 300 | % | ISO 8986-2 |
| Flexural Modulus | 450 | MPa | ISO 178 |
| Additional Information |
|---|
| PB-1 is not sold for pipe applications in North America. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 200 - 240 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 180 - 200 | °C |
| Extrusion instructions |
|---|
| Vacuum: 30 mbar - 60 mbarCooling water temperature: 10 °C - 12 °C |
| Note Message | |
|---|---|
| 1 . | Type IV spec |
| 2 . | Type IV spec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULAMID® 6 RBL 3000 BLACK | A. Schulman Europe | Nylon 6 | SCHULAMID® |
| ADMER™ AT2235E | Mitsui Chemicals Europe GmbH | LLDPE | ADMER™ |
| DJSilicone NE-641 | DONGJUE SILICONE (NANJING) CO., LTD | Silicone | DJSilicone |
| ICORENE® 4014 | ICO Polymers EMEA, A Division of A. Schulman | PP Copolymer | ICORENE® |
| Ultrathene® UE672317X02 | LyondellBasell Industries | EVA | Ultrathene® |
