Order Products : sales@su-jiao.com
FRAGOM PR/900
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | FRAGOM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RyeqNA_FRAGOM-PR-900.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FRAGOM is the trade-mark of our flame retardant halogen free polyolefine thermoplastic compounds. FRAGOM PR/900 is a flexible flame retardant polyolefine thermo-plastic compound having high temperature index and good oxygen index, suitable for cable sheathing and insulation. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.52 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 160°C/21.6 kg | 12 | g/10 min | |
| 190°C/21.6 kg | 29 | g/10 min |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 45 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 12.5 | MPa | IEC 60811 |
| Tensile Strain (Break) | 180 | % | IEC 60811 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (110°C, 168 hr) | 5.0 | % | IEC 60811 |
| Change in Tensile Strain at Break in Air (110°C, 168 hr) | -15 | % | IEC 60811 |
| Change in Tensile Stress (70°C, 4 hr, in SAE 20 Oil) | -4.0 | % | IEC 60811 |
| Change in Tensile Strain at Break (70°C, 4 hr, in SAE 20 Oil) | -8.0 | % | IEC 60811 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cold Elongation (-25°C) | 40 | % | |
| Hot Set - Penetration 1(80°C) | 35 | % | IEC 60811 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Corrosive Gas in Smoke - pH | > 4.50 | IEC 60754-2 | |
| Halogen Content | 0 | % | IEC 60754-1 |
| Temperature Index (Burning) 2 | 300 | °C | NES 715 |
| Oxygen Index | 42 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 100 | °C | |
| Cylinder Zone 2 Temp. | 115 | °C | |
| Cylinder Zone 3 Temp. | 145 | °C | |
| Cylinder Zone 4 Temp. | 160 | °C | |
| Cylinder Zone 5 Temp. | 165 | °C | |
| Die Temperature | 170 | °C |
| Note Message | |
|---|---|
| 1 . | 4 hr |
| 2 . | 21% O2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP PA6 15 GF 25 M BLK | RTP Company | Nylon 6 | RTP |
| SORVEX 1200 | Sorensen Ventures | PBT | SORVEX |
| TPUCO® TPUI-L95 | Taiwan PU Corporation | TPU-Polyether | TPUCO® |
| NEFTEKHIM PP 1548R | Nizhnekamskneftekhim Inc. | PP Homopolymer | NEFTEKHIM PP |
| Hylon® N1030HHR | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
