Order Products : sales@su-jiao.com
Hanwha Total PP KL11SW
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | HANWHA TOTAL PETROCHEMICALS Co., Ltd. |
| Trademark: | Hanwha Total PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RxqtOl_Hanwha-Total-PP-KL11SW.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
KL11SW is a polypropylene compound that features superior anti-fungus with possessing balanced strength and impact strength due to use of high-quality base resins. Outstanding features of this resin are high flowability, superior processability and high resistance to thermal discoloration and to light with excellent external finishes and high anti-fungus properties. KL11SW has passed anti-fungus tests in Korea and Japan, and is widely used for electronic parts and kitchen utensils requiring anti-fungus characteristics. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.950 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.30 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | 10.8 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 590 | % | ASTM D638 |
| Flexural Modulus 3 | 196 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 39.0 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 170 to 180 | °C | |
| Middle Temperature | 190 to 220 | °C | |
| Front Temperature | 190 to 220 | °C | |
| Nozzle Temperature | 210 to 230 | °C | |
| Mold Temperature | 20.0 to 80.0 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 5.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYLAC® PA-764 | CHI MEI CORPORATION | ABS | POLYLAC® |
| Sylvin 8329-65D Natural | Sylvin Technologies Incorporated | PVC, Semi-Rigid | Sylvin |
| Etinox® ER-0000 | Ercros, S.A. | PVC, Rigid | Etinox® |
| DuraFlex 202-6 | Evermore Chemical Industry Co., Ltd. | TPU-Polyether | DuraFlex |
| GERMAMID 6.6 HV | Kunststoff-Kontor-Hamburg GmbH | Nylon 66 | GERMAMID |
