Order Products : sales@su-jiao.com
Advanced Composites ATX832D
| Category: | TPO , Compounded Polypropylene |
| Manufacturer: | Advanced Composites, Inc. |
| Trademark: | Advanced Composites |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RwrkAZ_Advanced-Composites-ATX832D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Advanced Composites ATX832D is a composite polypropylene product, which contains talc filler. It is available in North America. Typical application areas are: automotive industry. Features include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.03 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 30 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 22.0 | MPa | ISO 527-2 |
| Flexural Modulus | 1940 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Instrumented Dart Impact 1 | ASTM D3763 | ||
| 0°C, Total Energy | 23.3 | J | ASTM D3763 |
| 23°C, Total Energy | 23.6 | J | ASTM D3763 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 204 | °C | |
| Middle Temperature | 218 | °C | |
| Front Temperature | 218 | °C | |
| Nozzle Temperature | 216 | °C | |
| Processing (Melt) Temp | 204 - 232 | °C | |
| Mold Temperature | 48.9 - 60.0 | °C | |
| Cushion | 6.35 - 12.7 | mm |
| Injection instructions |
|---|
| Injection Pressure: 10% over max fill pressureHolding Pressure: 50 to 60% of max fill pressureInjection Speed: 1 to 3 inches/secScrew RPM: 1 to 2 secs before mold open |
| Note Message | |
|---|---|
| 1 . | 6.60 m/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Melthene® -G Melthene®-G | TOSOH Corporation | EVA | Melthene® -G |
| SLOVALEN® PH 49 GF 30 TS | Plastcom | PP, Unspecified | SLOVALEN® |
| SPESIN® KP513MT25BK | Kolon Plastics, Inc. | PBT | SPESIN® |
| REV Materials 8008-003 | REV Materials | PP, Unspecified | REV Materials |
| Sarlink® TPE EE-2270B (PRELIMINARY DATA) | Teknor Apex Company | TPE | Sarlink® TPE |
