Order Products : sales@su-jiao.com
Lanufene HDI-6507N
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Ras Lanuf Oil & Gas Processing Company (RASCO) |
| Trademark: | Lanufene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RwdOmp_Lanufene-HDI-6507N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LANUFENE HDI 6507N is a very high density polyethylene resin for injection molding of products with high mechanical properties and good process-ability as the main characteristics. The injection molded product from this resin characteristically exhibits good rigidity with outstanding mechanical properties. LANUFENE HDI 6507N is recommended for crates, containers, trays and other similar objectives where good rigidity and mechanical properties are needed. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.965 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.5 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance 1(50°C, 100% Igepal, F50) | 40.0 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Ultimate) | 33.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 1000 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 48 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 128 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 220 to 270 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 180 to 230 | °C |
| Note Message | |
|---|---|
| 1 . | Non-slitted |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MOSTEN GB 218 | UNIPETROL RPA | PP Homopolymer | MOSTEN |
| BCC Resins BC 4558 | BCC Products Inc. | Polyester, TS | BCC Resins |
| Evermore PUR SS-1040NP | Evermore Chemical Industry Co., Ltd. | PUR, Unspecified | Evermore PUR |
| INTREPID™ 2498 BK | The Dow Chemical Company | HDPE | INTREPID™ |
| POLYfill PPH T15040CR | Polykemi AB | PP Homopolymer | POLYfill |
