Order Products : sales@su-jiao.com
InnoTuf® HP-2120A
| Category: | TSU-Ether , Polyurethane Thermoset Elastomer, Polyether Based |
| Manufacturer: | Innovative Polymers, Inc. |
| Trademark: | InnoTuf® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RsorGG_InnoTuf-HP-2120A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HP-2120A is a high performance polyether based polyurethane elastomer formulated for hand-batch processing methods. Excellent physical properties can be obtained with a room temperature cure without the utilization of mercury, MOCA, or MDI. |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| Hardener | 1.03 | g/cm³ | |
| Cured | 1.04 | g/cm³ | |
| Base Resin | 1.06 | g/cm³ | |
| Molding Shrinkage - Flow | 0.20 to 0.50 | % | ASTM D2566 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Volume: 44 Mix Ratio by Weight: 43 | ||
| Resin | Mix Ratio by Weight: 100 Mix Ratio by Volume: 100 | ||
| Demold Time | 300 to 420 | min |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Viscosity | |||
| 25°C 1 | 0.13 | Pa·s | |
| 25°C 2 | 0.48 | Pa·s | |
| 25°C 3 | 0.63 | Pa·s | |
| Curing Time 4 | 29 | hr | |
| Gel Time | 15 to 25 | min |
| Cured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 15 to 25 | ASTM D2240 | |
| Tensile Strength | 1.79 | MPa | ASTM D638 |
| Tensile Elongation at Break | 500 | % | ASTM D638 |
| Tear Strength | 5.25 | kN/m | ASTM D624 |
| Note Message | |
|---|---|
| 1 . | Hardener |
| 2 . | Mixed |
| 3 . | Resin |
| 4 . | 5 hours at 150°F + 24 hours at 77°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AIE PA6 50G3 | Asia International Enterprise (Hong Kong) Limited | Nylon 6 | AIE PA6 |
| ALTECH® ABS A 1000/139 AS | ALBIS PLASTIC GmbH | ABS | ALTECH® ABS |
| INSTRUC PSUGF30 | Infinity LTL Engineered Compounds | PSU | INSTRUC |
| Lionpol HC-204552 | Lion Polymers Incorporated | TPE | Lionpol |
| Durethan® DP A 30 S FN30 DUS025 000000 | LANXESS Asia/Pacific | Nylon 66 | Durethan® |
