Order Products : sales@su-jiao.com
MAJORIS EWGC460H
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | AD majoris |
| Trademark: | MAJORIS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RsMUpe_MAJORIS-EWGC460H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EWGC460H is a 40% fiber / mineral filled polypropylene copolymer compound intended for injection moulding. The product is available in both black (EWGC460460H - 8229) and natural (EWGC460H) but other colours can be provided on request. EWGC460H has been developed especially for the applications appliances and electrical components. APPLICATIONS Products requiring good rigidity, low shrinkage, high dimensional stability can suitably be made from EWGC460H. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.20 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 11 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.20 - 1.0 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus - 1% Secant | 2500 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 50 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 130 | °C | ISO 75-2/B |
| Ball Pressure Test (138°C) | Pass | NF C 61-303 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 | |
| Glow Wire Flammability Index (2.00 mm) | 750 | °C | IEC 60695-2-12 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 220 - 270 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Holding pressure: 50 to 70% of the injection pressure |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Unipren® Elastomers A3 PRTA010 45A EG06S1 UP326 | Petropol Industry and Trade of Polymers LTDA | TPE | Unipren® Elastomers |
| Arnitel® PB582-H | DSM Engineering Plastics | TPC-ET | Arnitel® |
| ASI POLYPROPYLENE 1500X-01 | A. Schulman Inc. | PP Impact Copolymer | ASI POLYPROPYLENE |
| Emulprene® 1500A | INSA | SBR, Emulsion | Emulprene® |
| Braskem PE SHC7260LS-L | Braskem America Inc. | HDPE | Braskem PE |
