Order Products : sales@su-jiao.com
MAJORIS FFR307C - 8487
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | AD majoris |
| Trademark: | MAJORIS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Rrtcg7_MAJORIS-FFR307C---8487.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FFR307C - 8487 is a low halogen no blooming flame retardant compound UL 94 V2, intended for injection moulding. The product is available in natural (FFR307C) but other colours can be provided on request FFR307C - 8487 produce is UV stabilised and antistatic. Provides an excellent balance of very good impact strength and rigidity. FFR307C - 8487 is especially designed for electrical/appliance applications exterior/interior. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.18 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 18 | g/10 min | ISO 1133 |
| Molding Shrinkage (2.00 mm) | 1.0 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 15.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield) | 4.0 | % | ISO 527-2/50 |
| Flexural Modulus - 1% Secant | 1700 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 3.5 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 104 | °C | ISO 75-2/B |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.60 mm) | V-2 | UL 94 | |
| Glow Wire Flammability Index (2.00 mm) | 850 | °C | IEC 60695-2-12 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 210 - 240 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Holding pressure: 50 to 70% of the injection pressure |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PC GN1009RF | Sincerity Australia Pty Ltd. | PC | Sindustris PC |
| Huafon JF-D-8608 | Huafon Group Co., Ltd. | PUR, Unspecified | Huafon |
| Ipethene® 830 | Carmel Olefins Ltd. | LDPE | Ipethene® |
| Pibiter® BM521 NERO | SO.F.TER. SPA | PBT | Pibiter® |
| Infino LT-1220 | LOTTE ADVANCED MATERIALS CO., LTD. | PC | Infino |
