| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | ICO Polymers NA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RrgYDo_ICORENE3560.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
|
ICORENE® 3560 is a linear low density polyethylene specifically developed for rotational moulding. ICORENE® 3560 is suitable for use in general purpose applications. It has a good balance of properties such as toughness, easy flow and stiffness. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.935 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 100% Igepal) | 30.0 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 17.0 | MPa | ASTM D638 |
| Flexural Modulus | 650 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Drop Impact Resistance 1(-20°C) | 170 | J/cm | Internal method |
| Note Message | |
|---|---|
| 1 . | Based on ISO 6603 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polytron® P30N07 | Polyram Ram-On Industries | PP Homopolymer | Polytron® |
| SCLAIR® 19G | NOVA Chemicals | HDPE | SCLAIR® |
| 4MID® 9B22130 UV | 4Plas | Nylon 6 | 4MID® |
| Gallonprene® GP520-5001 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| LNP鈩?STAT-KON鈩?Noryl_HMC1010 compound | SABIC Innovative Plastics | PPE+PS | LNP™ STAT-KON™ |