Category: | HDPE , High Density Polyethylene |
Manufacturer: | Saudi Polymers Company |
Trademark: | Marlex® |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | RrgMWU_Marlex-HHM-5202BN-87984.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
This high molecular weight, hexene copolymer is tailored for light weight blow moulded containers that require:
Typical blow moulded applications for HHM 5202BN include:
|
General Information | |
---|---|
Features |
|
Uses |
|
Agency Ratings |
|
Forms |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Density | 0.951 | g/cm³ | ASTM D1505 |
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.35 | g/10 min | ASTM D1238 |
Environmental Stress-Cracking Resistance (100% Igepal, Compression Molded, F50) | 50.0 | hr | ASTM D1693B |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Strength 1(Yield, Compression Molded) | 26.0 | MPa | ASTM D638 |
Tensile Elongation 2(Break, Compression Molded) | 600 | % | ASTM D638 |
Flexural Modulus - Tangent (Compression Molded) | 1310 | MPa | ASTM D790 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Brittleness Temperature 3 | < -75.0 | °C | ASTM D746A |
Additional Information |
---|
The physical properties were determined on compression moulded specimens that were prepared in accordance with Procedure C of ASTM D4703, Annex A1. |
Note Message | |
---|---|
1 . | Type 4, 51mm/min |
2 . | Type 4, 51mm/min |
3 . | Type I specimen |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
TAIRIPRO S1019 | Formosa Plastics Corporation | PP Homopolymer | TAIRIPRO |
CERTENE™ LLBI-2024 | Muehlstein | LLDPE | CERTENE™ |
Aurora PVC AP2290 Series | Aurora Plastics, Inc. | PVC, Unspecified | Aurora PVC |
Ebalta GH 761 / D | Ebalta Kunststoff GmbH | Epoxy | Ebalta |
EPO-TEK® 353ND-T4 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |