Order Products : sales@su-jiao.com
Andur 8200 AP/Curene® 442
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RpNxtf_Andur-8200-AP-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 8200-AP is a polyether (PPG) based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 82 to 84 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.11 | g/cm³ | ASTM D1505 |
| Molding Shrinkage - Flow | 1.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 83 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 4.48 | MPa | ASTM D412 |
| 300% strain | 9.65 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 17.2 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 400 | % | ASTM D412 |
| Compression Set | 29 | % | ASTM D395B |
| Bayshore Resilience | 30 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 7.0 - 9.0 | min | |
| Demold Time (100°C) | 25 | min | |
| Post Cure Time (100°C) | 4.0 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore A: 81 to 84Die C Tear, ASTM D1004: 215 pliAverage Split Tear, ASTM D1938: 65 pliStoichiometry Curative Level: 95%Cure Time, 150 to 160°F: OvernightMix Temperature: Andur 8200 AP: 160-212°F Curene 442: 250°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Qenos PE GM5049B | Qenos Pty Ltd | HDPE, HMW | Qenos PE |
| ARC ARC66G13 | ARC Resin Corporation | Nylon 66 | ARC |
| Ferro PP NPP00GW35HB | Ferro Corporation | PP, Unspecified | Ferro PP |
| Kpren 135A | Shandong Xuye New Materials Co., Ltd. | CPE | Kpren |
| SIBUR Synthetic Rubber SBR-1706 Grade C | SIBUR | SBR, Emulsion | SIBUR Synthetic Rubber |
