Order Products : sales@su-jiao.com

PRIMALENE WPP732

Category:	HDPE , High Density Polyethylene
Manufacturer:	Southern Polymer, Inc.
Trademark:	PRIMALENE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	RotpVi_PRIMALENE-WPP732.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

An 6.6 melt index high density polyethylene

Applications:

Industrial pails (5-gallon)

Pail lids

Automotive applications

Foamed parts

Features:

Excellent impact strength

Good stiffness

FDA 21 CFR 177.1520 (c) 3.2a

General Information
Features	Food Contact Acceptable Good Impact Resistance Good Stiffness High Density
Uses	Automotive Applications Foam Food Service Applications Industrial Applications Industrial Parts Lids Non-specific Food Applications Pails
Agency Ratings	FDA 21 CFR 177.1520(c) 3.2a

Physical	Nominal Value	Unit	Test Method
Density	0.953	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	6.6	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal, F50)	20.0	hr	ASTM D1693B

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	62		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield)	28.3	MPa	ASTM D638
Tensile Elongation ²(Break)	950	%	ASTM D638
Flexural Modulus - Tangent ³	1280	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -75.0	°C	ASTM D746
Vicat Softening Temperature	125	°C	ASTM D1525

Note Message
1 .	51 mm/min
2 .	51 mm/min
3 .	13 mm/min

Resin Grade	Manufacturer	Category	Trademark
Roechling SUSTAECTFE	Röchling Sustaplast SE & Co. KG	ECTFE	Roechling
EPO-TEK® TV1003-LV	Epoxy Technology Inc.	PI, TS	EPO-TEK®
Hostaform® FK 1:25	Celanese Corporation	Acetal (POM) Copolymer	Hostaform®
JSR EPR EP57P	JSR Corporation	EPDM	JSR EPR
TechnoFin PP EPDM 5	TechnoCompound GmbH	PP+EPDM	TechnoFin