Order Products : sales@su-jiao.com
NYCOA Polyamide 870
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Nycoa (Nylon Corporation of America) |
| Trademark: | NYCOA Polyamide |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RopmbY_NYCOA-Polyamide-870.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NYCOA 870 is a heat stabilized extrusion grade resin recommended for wire and cable jacketing. Its excellent abrasion resistance and heat stability provide an exceptionally durable protective jacket for many types of wire products, and its processing char NYCOA 870 has been listed by Underwriters Laboratories for jacketing types THHN and THWN thermoplastic-insulated building wires and gasoline resistant types THWN and TW. Approval for jacketing appliance and wiring material for 75C oil resistant uses has a NYCOA 870 can be certified to MIL-M-20693A, Types IV and IVA nylon. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 1.8 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 105 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | 79.3 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 150 | % | ASTM D638 |
| Flexural Modulus 3 | 2590 | MPa | ASTM D790 |
| Flexural Strength 4 | 114 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 48 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 60.0 | °C | ASTM D648 |
| Melting Temperature | 216 | °C | DSC |
| Additional Information |
|---|
| The value listed as Melting Point DSC, was tested in accordance with ASTM D789. |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 51 mm/min |
| 4 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Medalist® MD-575D | Teknor Apex Company | TPE | Medalist® |
| Wellamid® 42LHN2-N | Wellman Engineering Resins | Nylon 6 | Wellamid® |
| ALTECH® PA6 B 1000/209 | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| Evoprene™ 076 | AlphaGary | SBS | Evoprene™ |
| Epoxies, Ect. 20-2370 | Epoxies, Etc. | PUR, Unspecified | Epoxies, Ect. |
