Order Products : sales@su-jiao.com
KRATON® D4153 E
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RomIDI_KRATON-D4153-E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D4153 E is an oil-extended linear block copolymer based on styrene and butadiene with bound styrene in the neat polymer of 35% mass. It contains 40 phr paraffinic oil which is classified as not hazardous. Information on the CAS and EINECS registry numbers of the paraffinic oil used for this grade is available on request. The product is supplied from Europe in the physical form identified below.
Kraton D4153 E is used in formulating compounds for footwear, technical and general purpose applications. It can also be used in formulating adhesives, sealants and coatings and as a modifier of bitumen. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.940 | g/cm³ | ASTM D792 |
| Apparent Density | 0.40 | g/cm³ | ASTM D1895B |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 23 to 37 | g/10 min | ISO 1133 |
| Bound Styrene | 34.0 to 36.0 | % | Internal Method |
| Antioxidant Additive | > 0.10 | % | Internal Method |
| Ash Content | ISO 247 | ||
| ES | 0.15 to 0.35 | % | |
| ESM | 2.5 to 5.0 | % | |
| Extractables - Total, Oil | 29.0 to 32.0 | % | Internal Method |
| Volatile Matter | < 0.30 | % | Internal Method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion | 105 | mm³ | DIN 53516 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 15 sec, Injection Molded) | 43 to 47 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 2.50 | MPa | ISO 37 |
| Tensile Stress (Yield) | 10.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 900 | % | ISO 37 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVALEN® PH 62 N TS | Plastcom | PP, Unspecified | SLOVALEN® |
| Axiall PVC 1501 Clear 7002 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| Mafill® CR HT 5344 H | Ravago Group | PP Homopolymer | Mafill® |
| Novalloy-S S1220 | PlastxWorld Inc. | PC+ABS | Novalloy-S |
| ULTEM™ 2212R resin | SABIC Innovative Plastics | PEI | ULTEM™ |
