Order Products : sales@su-jiao.com
3M™ Dyneon™ Fluoroelastomer FC 2123Z
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | 3M Advanced Materials Division |
| Trademark: | 3M™ Dyneon™ Fluoroelastomer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RmdvnB_3M-Dyneon-Fluoroelastomer-FC-2123Z.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 3M™ Dyneon™ Fluoroelastomer FC 2123 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FC 2123 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
| General Information |
|---|
| Additives Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.80 | g/cm³ |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Westlake LLDPE LF2018 | Westlake Chemical Corporation | LLDPE | Westlake LLDPE |
| Borealis PE MG9621 | Borealis AG | HDPE | Borealis PE |
| Grilon® BS 23 | EMS-GRIVORY | Nylon 6 | Grilon® |
| Isocor™ HW115SI | Shakespeare Monofilaments and Specialty Polymers | Nylon 610 | Isocor™ |
| Polifil® Nylon 627LP | The Plastics Group | Nylon 66 | Polifil® Nylon |
