Order Products : sales@su-jiao.com
DOW™ HDPE 7808 C
| Category: | HDPE , High Density Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | DOW™ HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RmaLir_DOW-HDPE-7808-C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DOW™ HDPE 7808 C is a High Density Polyethylene Resin material. It is available in Latin America. Important attributes of DOW™ HDPE 7808 C are:
Typical application of DOW™ HDPE 7808 C: Food Contact Applications |
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.943 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/21.6 kg | 7.0 | g/10 min | |
| 190°C/5.0 kg | 0.22 | g/10 min | |
| Environmental Stress-Cracking Resistance (100°C, 2.00 mm, 100% Igepal) | > 2000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 64 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 20.6 | MPa | |
| Break | 32.4 | MPa | |
| Tensile Elongation (Break) | 660 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 123 | °C | ASTM D1525 |
| Oxidation Induction Time (200°C) | > 60 | min | ASTM D3895 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 165 | °C | |
| Cylinder Zone 2 Temp. | 185 | °C | |
| Cylinder Zone 3 Temp. | 200 | °C | |
| Cylinder Zone 4 Temp. | 205 | °C | |
| Die Temperature | 200 to 215 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sasol Polymers PE LT019/08 | Sasol Polymers | LDPE | Sasol Polymers PE |
| Baytec® MS-092 (HQEE) | Covestro - PUR | PUR-Ester/MDI | Baytec® |
| EPO-TEK® CF6-2 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| O'Tech OM 5220 | O'Tech Corporation | PVC, Unspecified | O'Tech |
| Plenco 06401 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
