Order Products : sales@su-jiao.com
COPYLENE® CM200LN-02
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Phillips 66 |
| Trademark: | COPYLENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Rluh5U_COPYLENE-CM200LN-02.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
COPYLENE ® CM200LN-02 is specially designed for injection molding applications where an excellent balance of stiffness/impact and good cycle times are required. Applications:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.902 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 23.8 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 5.1 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 2 | 1270 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 130 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 105 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 1.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® S 40 EPT2808 333 NER | Radici Plastics | Nylon 6 | Radilon® |
| Sindustris PP HR2101D | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| Gallonprene® GP520-7001 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| Hyrene® PS-HI 3/4 | Entec Polymers | PS (HIPS) | Hyrene® |
| LNP™ LUBRICOMP™ KP003AXZ compound | SABIC Innovative Plastics | Acetal (POM) Homopolymer | LNP™ LUBRICOMP™ |
