Order Products : sales@su-jiao.com

Precision Polymer E80Q

Category:	EPDM , Ethylene Propylene Diene Terpolymer
Manufacturer:	Precision Polymer Engineering Ltd.
Trademark:	Precision Polymer
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Rk1afS_Precision-Polymer-E80Q.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
E80Q is a peroxide-cured, Ethylene Propylene Terpolymer material formulated using only those ingredients determined by the US Food and Drug Administration (FDA). E80Q is suitable for use in food contact applications requiring FDA and 3A compliance. E80Q provides excellent water and steam resistance and good compression set properties. The material's heat and chemical resistance is superior to that of sulphur-cured EPDM. Available in any sized O-ring (fully moulded up to 2.5m/8ft internal diameter), gaskets and custom designed components. Key Attributes FDA compliant to CFR 21 § 177.2600 (a-d) 3A Sanitary Standard 18-03 Class 2 compliant Free from Animal Derived Ingredients (ADI) Typical Attributes Recommended for use in food and dairy applications. O-rings Gaskets Hygienic/sanitary couplings & pipe connectors Valves Pumps Metering equipment

Message

E80Q is a peroxide-cured, Ethylene Propylene Terpolymer material formulated using only those ingredients determined by the US Food and Drug Administration (FDA). E80Q is suitable for use in food contact applications requiring FDA and 3A compliance.

E80Q provides excellent water and steam resistance and good compression set properties. The material's heat and chemical resistance is superior to that of sulphur-cured EPDM.

Available in any sized O-ring (fully moulded up to 2.5m/8ft internal diameter), gaskets and custom designed components.

Key Attributes

FDA compliant to CFR 21 § 177.2600 (a-d)

3A Sanitary Standard 18-03 Class 2 compliant

Free from Animal Derived Ingredients (ADI)

Typical Attributes
Recommended for use in food and dairy applications.

O-rings

Gaskets

Hygienic/sanitary couplings & pipe connectors

Valves

Pumps

Metering equipment

General Information
Features	Steam resistance Compliance of Food Exposure Low or no water absorption
Uses	Pump parts Washer Valve/valve components Non-specific food applications Pipe seal Piping system Connector Bathroom products
Agency Ratings	FDA 21 CFR 177.2600 FDA Food Exposure, Not Rated
Appearance	Black

Hardness	Nominal Value		Test Method
Durometer Hardness (Shore A)	77		ASTM D2240
IRHD Hardness	78		ASTM D1415, ISO 48

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	9.00	MPa	ASTM D412, ISO 37
Tensile Elongation (Break)	220	%	ASTM D412, ISO 37
Compression Set (125°C, 22 hr)	21	%	ASTM D395, ISO 815

Thermal	Nominal Value	Unit
Maximum Operating Temperature	150	°C

Additional Information	Nominal Value	Unit	Test Method
Low Temperature Resistance - Non-brittle for 3 mins	-40	°C	ISO R812
Minimum Operating Temperature: -40°C (-40°F)

Resin Grade	Manufacturer	Category	Trademark
RALUPOL® UP 4802	RASCHIG GmbH	Polyester, TS	RALUPOL®
Telcar® TL-1949A-55NT WHT 1165	Teknor Apex Company	TPE	Telcar®
Evatane® 28-150	Arkema	EVA	Evatane®
Hanwha Total PE 532L	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	LDPE	Hanwha Total PE
Karina RED COLOR CONCENTRATE -E 42/183-FC-LMP	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina