Order Products : sales@su-jiao.com
Isocor™ HG26SI
| Category: | Nylon 612 , Polyamide 612 |
| Manufacturer: | Shakespeare Monofilaments and Specialty Polymers |
| Trademark: | Isocor™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RiVNCI_Isocor-HG26SI.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ISOCOR™ HG26SI is a medium viscosity PA-612 based nylon. This resin is specifically suited for applications requiring low-moisture regain and greater dimensional stability. ISOCOR™ HG26SI is used in applications requiring good electrical insulation properties. This resin can be processed using conventional techniques. Typical applications for HG26SI include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.04 | -- | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 1.2 | -- | % | ASTM D955 |
| Water Absorption (24 hr) | 1.2 | -- | % | ASTM D570 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 2300 | 2230 | MPa | ASTM D638 |
| Tensile Strength | 31.4 | 31.4 | MPa | ASTM D638 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact | 37 | 39 | J/m | ASTM D256 |
| Dart Drop Impact | 36.2 | 36.2 | J | ASTM D3029 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Melting Temperature | 218 | -- | °C | DSC |
| Additional Information |
|---|
| 干燥 Color, ASTM D1003-97: 69.03 LColor, ASTM D1003-97: -2.17 aColor, ASTM D1003-97: -7.61 b |
| Injection | Dry | Unit | |
|---|---|---|---|
| Dew Point | < -17.8 | °C | |
| Suggested Max Moisture | 0.20 | % | |
| Hopper Temperature | 79.4 | °C | |
| Rear Temperature | 221 - 243 | °C | |
| Middle Temperature | 227 - 260 | °C | |
| Front Temperature | 238 - 271 | °C | |
| Nozzle Temperature | 238 - 271 | °C | |
| Processing (Melt) Temp | 238 - 271 | °C | |
| Mold Temperature | 10.0 - 93.3 | °C | |
| Injection Pressure | 3.45 - 13.8 | MPa | |
| Injection Rate | Fast | ||
| Back Pressure | 0.345 | MPa |
| Extrusion | Dry | Unit | |
|---|---|---|---|
| Suggested Max Moisture | 0.10 | % | |
| Hopper Temperature | 79.4 | °C | |
| Cylinder Zone 1 Temp. | 254 | °C | |
| Cylinder Zone 2 Temp. | 266 | °C | |
| Cylinder Zone 3 Temp. | 271 | °C | |
| Cylinder Zone 4 Temp. | 271 | °C | |
| Die Temperature | 271 | °C |
| Extrusion instructions |
|---|
| Flange: 500°F (260°C)Air Dew Point (max): 0°F (-18°C)Neck: 500°F (260°C)Head: 480°F (250°C)Pump: 480°F (250°C)L/D Ratio: 24 to 30:1Compression Ratio: 3.5:1Polymer @ Die: 430°F (220°C)Screw Pressure: 2000 psi |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Veroplas VF790 | PlastxWorld Inc. | ABS | Veroplas |
| YUNGSOX® PP 3080 | Formosa Polypropylene | PP Impact Copolymer | YUNGSOX® PP |
| Elastocon® 2860L | Elastocon TPE Technologies | TPE | Elastocon® |
| HiFill® PA6 GB20 L | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| Laprene® 830000970 | SO.F.TER. SPA | SEBS | Laprene® |
