Order Products : sales@su-jiao.com
FRAGOM PR/399
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | FRAGOM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Ri6H2d_FRAGOM-PR-399.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FRAGOM : is the trademark of our flame retardant halogen free polyolefine thermoplastic compounds. FRAGOM PR/399: flame retardant polyolefine thermoplastic compound having high temperature index and good oxygen index, suitable for cable sheathing and insulation. Certify : CEI2011 M1,VDE0207 HM2 |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.52 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (150°C/21.6 kg) | 7.0 - 10 | g/10 min | ASTM D1238 |
| Water absorption rate- 24 hr (100°C) | 12.0 | g/m² | IEC 60811 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot pressing test- 4h at 80°C -Penetratrion | 25 | % | IEC 60811 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Halogen Content | % | IEC 60754-1 | |
| Temperature Index (Combustion) 1 | 290 | °C | NES 715 |
| Corrosive gases in flue gas- pH | > 4.30 | IEC 60754-2 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 170 | °C |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 46 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | > 10.0 | MPa | IEC 60811 |
| Tensile Strain (Break) | > 150 | % | IEC 60811 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (100°C, 168 hr) | 8.0 | % | IEC 60811 |
| Change in Tensile Strain at Break in Air (100°C, 168 hr) | -12 | % | IEC 60811 |
| Change in Tensile Strength (70°C, 4 hr, in SAE 20 Oil) | < 30 | % | IEC 60811 |
| Change in Tensile Strain at Break (70°C, 4 hr, in SAE 20 Oil) | < 30 | % | IEC 60811 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 40 | % | ASTM D2863 |
| Additional Information |
|---|
| No detrimental effects on properties and capability of FRAGOM in presence of Masterbatch colours, black included.We suggest to dry masterbatch before using. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Cylinder Zone 1 Temp. | 130 | °C | |
| Cylinder Zone 2 Temp. | 145 | °C | |
| Cylinder Zone 3 Temp. | 155 | °C | |
| Cylinder Zone 4 Temp. | 165 | °C | |
| Die Temperature | 175 | °C |
| Note Message | |
|---|---|
| 1 . | 21% O2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SEQUEL® 1825-UV | LyondellBasell Industries | TPO (POE) | SEQUEL® |
| DJSilicone NE-7180 | DONGJUE SILICONE (NANJING) CO., LTD | Silicone | DJSilicone |
| Ferro PP TPP20AN87BK | Ferro Corporation | PP, Unspecified | Ferro PP |
| Fibrolon® P 7550 | FKuR Kunststoff GmbH | Polyolefin, Unspecified | Fibrolon® |
| JSR EPR EP22 | JSR Corporation | EPDM | JSR EPR |
