Order Products : sales@su-jiao.com
Utomer UT1CP95AC
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Shanghai Utomer Material Science Co., Ltd. |
| Trademark: | Utomer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RhAXh0_Utomer-UT1CP95AC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TYPE: Utomer UT1CP95AC TPU is a 95A Polyether-type TPU Features: Excellent clarity and UV stable with good melt strength. Uses: Injection for 3 c electronic products or shoe part. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 93 to 97 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | < 45.0 | mm³ | DIN 53516 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | > 9.00 | MPa | |
| 300% Strain | > 19.0 | MPa | |
| Tensile Strength | > 30.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | > 500 | % | ASTM D412 |
| Tear Strength | > 0.110 | kN/m | ASTM D624 |
| Compression Set | ASTM D395B | ||
| 23°C, 70 hr | < 38 | % | |
| 70°C, 24 hr | < 45 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -15.0 | °C | ASTM D3418 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | 20 | hr | |
| Rear Temperature | 190 | °C | |
| Middle Temperature | 195 | °C | |
| Front Temperature | 200 | °C | |
| Nozzle Temperature | 205 | °C | |
| Mold Temperature | 50.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Premi-Glas® 1201-15 | Premix, Inc. | TS, Unspecified | Premi-Glas® |
| SUSTAMID 12 MO | Röchling Sustaplast SE & Co. KG | Nylon 12 | SUSTAMID |
| CALP 5600B-2 | Lion Idemitsu Composites Co., Ltd. | HDPE | CALP |
| HiFill® PA6/6 GF13 IM-1 HS L | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| Hostacom CR 250 F M C12463 | LyondellBasell Industries | PP Copolymer | Hostacom |
