Order Products : sales@su-jiao.com

Naturacell® 24

Category:	CA , Cellulose Acetate
Manufacturer:	Rotuba Extruders, Inc.
Trademark:	Naturacell®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	RgyNe1_Naturacell24.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Wood-based polymer

Naturacell is a durable, attractive, plant-based plastic resin that can be reprocessed and reused in most applications. Best of all, it works with your existing tooling. So you can incorporate it into your products right away.

Naturacell™'s extraordinary physical properties make it not only an environmentally friendly plastic, but also an ideal material for thousands of consumer products:

Tough impact strength

Superior clarity and transparency

High surface gloss

Strong chemical resistance

Warm to the touch

General Information
Additive	Plasticizer (24) 2
Features	Highlight Impact resistance, good Updatable resources Good chemical resistance Definition, high
Uses	Cosmetic Packaging Handle Packaging Films Label Electrical/Electronic Applications Personal care Pipe fittings Home appliance components Furniture Car interior equipment Car exterior decoration Sporting goods Toys Stationery Toothbrush handle Glasses Bathroom accessories
Appearance	Opacity Clear/transparent
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.30	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR)	2.4	g/10 min	ASTM D1238
Molding Shrinkage - Flow	0.20 - 0.60	%	ASTM D955
Water Absorption (23°C, 24 hr)	2.2 - 2.6	%	ASTM D570

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	88		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield	53.8	MPa	ASTM D638
Fracture	53.8	MPa	ASTM D638
Tensile Elongation (Break)	15	%	ASTM D638
Flexural Modulus	1770	MPa	ASTM D790
Flexural Strength (Yield)	57.2	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	120 - 260	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
0.45 MPa, not annealed	65.0 - 95.0	°C	ASTM D648
1.8 MPa, not annealed	50.0 - 87.2	°C	ASTM D648
Vicat Softening Temperature	90.0 - 126	°C	ASTM D1525

Optical	Nominal Value	Unit	Test Method
Transmittance (1520 µm)	> 90.0	%	ASTM D1003
Haze (1520 µm)	< 8.5	%	ASTM D1003

Additional Information	Nominal Value
Flow Designation	H2

Injection	Nominal Value	Unit
Drying Temperature	66 - 71	°C
Drying Time	2.0 - 3.0	hr
Rear Temperature	182 - 193	°C
Middle Temperature	182 - 193	°C
Front Temperature	188 - 199	°C
Nozzle Temperature	199 - 210	°C
Mold Temperature	38 - 82	°C
Injection Pressure	13.8	MPa
Back Pressure	0.00 - 0.448	MPa
Vent Depth	0.051 - 0.76	mm

Injection instructions
Injection Cycle Times: 2 to 12 secsBooster Cycle Time: 6 to 12 secCure Time: 10 to 70 sec

Extrusion	Nominal Value	Unit
Melt Temperature	193 - 210	°C

Resin Grade	Manufacturer	Category	Trademark
PRL PC-GP1-TFE10	Polymer Resources Ltd.	PC	PRL
Ravamid® A MF15 T GR 45	Ravago Group	Nylon 66	Ravamid®
RTP 105CC HS	RTP Company	PP Homopolymer	RTP
Styrilic Grade 2020	Deltech Polymers Corporation	Acrylic (SMMA)	Styrilic
Huaxia Shenzhou FKM DS2601-2	Shandong Huaxia Shenzhou New Material Co., Ltd.	Fluorelastomer	Huaxia Shenzhou