Order Products : sales@su-jiao.com
Dynaflex™ G7990-1001-00
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Dynaflex™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RgnDto_Dynaflex-G7990-1001-00.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Dynaflex™ G7990-1001-00 is an easy processing, general purpose TPE designed for a wide variety of applications.
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.17 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.80 - 1.4 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 93 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain, 23°C | 5.62 | MPa | ASTM D412 |
| 300% strain, 23°C | 6.62 | MPa | ASTM D412 |
| Tensile Strength (Break, 23°C) | 10.7 | MPa | ASTM D412 |
| Tensile Elongation (Break, 23°C) | 610 | % | ASTM D412 |
| Tear Strength 1(23°C) | 60.4 | kN/m | ASTM D624 |
| Compression Set (23°C, 22 hr) | 50 | % | ASTM D395B |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Viscosity (200°C, 11200 sec^-1) | 15.7 | Pa·s | ASTM D3835 |
| Additional Information |
|---|
| Dynaflex™ G7990-1001-00 can be recycled as a filler or impact modifier for polyolefins, or can be recycled by grinding and reintroduction to the molding process. Similar to PP or PE recycling process, if separated appropriately, it can be recycled many times.Municipality waste stream recycle code is "7" which is designated for "Other".Please contact GLS Thermoplastic Elastomers for a copy of our Recyclability Compliance letter. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Suggested Max Regrind | 20 | % | |
| Rear Temperature | 166 - 188 | °C | |
| Middle Temperature | 177 - 188 | °C | |
| Front Temperature | 188 - 227 | °C | |
| Nozzle Temperature | 188 - 227 | °C | |
| Mold Temperature | 15.6 - 37.8 | °C | |
| Back Pressure | 0.00 - 0.827 | MPa | |
| Screw Speed | 40 - 100 | rpm |
| Injection instructions |
|---|
| Note Message | |
|---|---|
| 1 . | 2 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 283 D TFE 15 SI 2 | RTP Company | Nylon 612 | RTP |
| Daicel PP PT2N1 | Daicel Polymer Ltd. | PP, Unspecified | Daicel PP |
| FRIANYL® A3 GF35 V0 | Nilit Plastics | Nylon 66 | FRIANYL® |
| Lapex A G/30 | LATI S.p.A. | PESU | Lapex |
| MAXAMID™ PA6MG40-BK | Pier One Polymers, Inc. | Nylon 6 | MAXAMID™ |
