Order Products : sales@su-jiao.com
Amodel® A-1133 L WH 015
| Category: | PPA , Polyphthalamide |
| Manufacturer: | Solvay Specialty Polymers |
| Trademark: | Amodel® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RbWpLE_Amodel-A-1133-L-WH-015.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| AMODEL A- 1133 NL resin is 33% glass fiber reinforced polyphthalamide (PPA), which is characterized by highly reflective white resin. The brand is characterized by high deformation temperature and low hygroscopicity compatible with SMT process. -white: A- 1133 NL WH 505 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Molding Shrinkage | ASTM D955 | ||
| Flow | 0.37 | % | ASTM D955 |
| Transverse flow | 0.89 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 174 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 1.8 | % | ASTM D638 |
| Flexural Modulus | 11900 | MPa | ASTM D790 |
| Flexural Strength | 246 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 37 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 302 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 269 | °C | ASTM D648 |
| Melting Temperature | 318 | °C | ASTM D570 |
| Linear thermal expansion coefficient | ASTM E831 | ||
| Flow : 50 to 100°C | 1.9E-5 | cm/cm/°C | ASTM E831 |
| Flow : 100 to 150°C | 2.0E-5 | cm/cm/°C | ASTM E831 |
| Horizontal : 50 to 100°C | 4.9E-5 | cm/cm/°C | ASTM E831 |
| Horizontal : 100 to 150°C | 5.6E-5 | cm/cm/°C | ASTM E831 |
| Horizontal : 150 to 200°C | 6.8E-5 | cm/cm/°C | ASTM E831 |
| Horizontal : 200 to 250°C | 1.3E-4 | cm/cm/°C | ASTM E831 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Light reflectivity | |||
| 460 nm | 85.8 | ||
| 540 nm | 90.6 | ||
| 620 nm | 90.0 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.045 | % | |
| Rear Temperature | 304 - 318 | °C | |
| Front Temperature | 316 - 329 | °C | |
| Processing (Melt) Temp | 321 - 343 | °C | |
| Mold Temperature | 135 | °C |
| Injection instructions |
|---|
| 建议采用通用螺杆，取最小背压 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong PA1212 PA1212C-04 | Shandong Dongchen Engineering Plastics Co., Ltd. | Nylon 1212 | Shandong PA1212 |
| TRAMID® 4110G33 | Samyang Corporation | Nylon, Unspecified | TRAMID® |
| BESTDUR THG6/01 | Triesa Plastics | PBT | BESTDUR |
| KumhoSunny PC/AES HEC0275 | Shanghai KumhoSunny Plastics Co., Ltd. | AES+PC | KumhoSunny PC/AES |
| MAJORIS CT203 - 5761 | AD majoris | PP, Unspecified | MAJORIS |
