Order Products : sales@su-jiao.com
Tekumid 6 SC
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | TEKUMA Kunststoff GmbH |
| Trademark: | Tekumid |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RZIPq5_Tekumid-6-SC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Tekumid 6 SC is a Polyamide 6 (Nylon 6) material. It is available in Europe. Primary attribute of Tekumid 6 SC: Flame Rated. |
| General Information | |
|---|---|
| Appearance |
|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.26 | -- | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | |||
| 23°C, 24 hr | 9.0 to 10 | -- | % | |
| Equilibrium, 23°C, 50% RH | 2.5 to 3.4 | -- | % |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness | 120 | 102 | ASTM D785 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Strength | ASTM D638 | |||
| Yield | 80.0 | 40.0 | MPa | |
| Break | 60.0 | 30.0 | MPa | |
| Tensile Elongation (Break) | > 60 | > 200 | % | ASTM D638 |
| Flexural Modulus | 2800 | 800 | MPa | ASTM D790 |
| Flexural Strength | 120 | 60.0 | MPa | ASTM D790 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact (0°C, 3.20 mm) | 45 | 500 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C, 3.20 mm) | 50 | 600 | J/m | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, Unannealed | 180 | -- | °C | |
| 1.8 MPa, Unannealed | 70.0 | -- | °C | |
| Vicat Softening Temperature | ||||
| -- | 200 | -- | °C | ASTM D1525 1 |
| -- | 165 | -- | °C | ISO 306/B50 |
| Melting Temperature | 215 to 220 | -- | °C | DSC |
| CLTE - Flow (-30 to 30°C) | 7.5E-5 | -- | cm/cm/°C | ASTM D696 |
| Thermal Conductivity | 0.25 | -- | W/m/K | ASTM C177 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+13 | 1.0E+10 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | 1.0E+11 | ohms·cm | IEC 60093 |
| Electric Strength | 90 | 40 | kV/mm | IEC 60243-1 |
| Dielectric Constant (1 MHz) | 3.60 | 7.00 | IEC 60250 | |
| Dissipation Factor (1 MHz) | 0.030 | -- | IEC 60250 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | UL 94 | |||
| 1.60 mm | HB | -- | ||
| 3.20 mm | V-2 | -- | ||
| Glow Wire Ignition Temperature (2.00 mm) | 750 | -- | °C | IEC 60695-2-13 |
| Note Message | |
|---|---|
| 1 . | Rate A (50°C/h), Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AIE ABS S20G2 | Asia International Enterprise (Hong Kong) Limited | ABS | AIE ABS |
| Chemlon® E-66 GF50 | Teknor Apex Company (Chem Polymer) | Nylon 66 | Chemlon® |
| Edgetek™ PC-20GF/000 FR NATURAL | PolyOne Corporation | PC | Edgetek™ |
| Pebax® 4033 SN 01 | Arkema | PEBA-Ether | Pebax® |
| Osterlene® LLSH0917 | Osterman & Company | LLDPE | Osterlene® |
