Order Products : sales@su-jiao.com

ACRYLITE® Heatresist FT15

Category:	Acrylic (PMMA) , Polymethyl Methacrylate Acrylic
Manufacturer:	Evonik Cyro LLC
Trademark:	ACRYLITE®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	RYBoZR_ACRYLITE-Heatresist-FT15.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

ACRYLITE® Heatresist FT15 polymer is an amorphous thermoplastic molding and extrusion compound based on polymethyl methacrylate (PMMA).

Typical properties of ACRYLITE® Heatresist acrylic polymers are:

excellent weather resistance

high light transmission

high mechanical strength

high surface hardness and mar resistance

good melt flow rate

versatile colorability due to crystal clarity

The special properties of ACRYLITE® Heatresist FT15 polymer are:

high heat resistance

available in transparent and a range of opaque colors

medium melt flow rate

AMECA listed

Application:
Used for injection molding and extrusion applications.

General Information
Features	Amorphous Good Colorability Good Weather Resistance High Clarity High Hardness High Heat Resistance High Strength Medium Flow Scratch Resistant
Uses	Automotive Applications Automotive Exterior Trim Lighting Applications
Agency Ratings	EC 1907/2006 (REACH)
Appearance	Clear/Transparent Colors Available Opaque
Forms	Pellets
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.19	g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR) (230°C/3.8 kg)	4.50	cm³/10min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	3500	MPa	ISO 527-2/1
Tensile Stress (Break)	50.0	MPa	ISO 527-2/5
Tensile Strain (Break)	3.1	%	ISO 527-2/5

Impact	Nominal Value	Unit	Test Method
Charpy Unnotched Impact Strength (23°C)	18	kJ/m²	ISO 179/1eU

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
0.45 MPa, Unannealed	107	°C	ISO 75-2/B
1.8 MPa, Unannealed	105	°C	ISO 75-2/A
Glass Transition Temperature	121	°C	IEC 1006
Vicat Softening Temperature	115	°C	ISO 306/B50

Flammability	Nominal Value	Unit	Test Method
Flame Rating (1.60 mm)	HB		UL 94
Glow Wire Ignition Temperature	675	°C	IEC 60695-2-13
Fire Rating	B2		DIN 4102

Optical	Nominal Value	Unit	Test Method
Refractive Index	1.502		ISO 489
Transmittance (3000 µm)	91.0	%	ISO 13468-2

Resin Grade	Manufacturer	Category	Trademark
XANTAR® F 22 UR	Mitsubishi Engineering-Plastics Corp	PC	XANTAR®
UNISOFT TPE™ ST-65A-NT-3-01	UNITED SOFT PLASTICS, Inc.	SEBS	UNISOFT TPE™
Akulon® F126-C	DSM Engineering Plastics	Nylon 6	Akulon®
Etinox® EI-6420	Ercros, S.A.	PVC, Flexible	Etinox®
Gallonprene® GP520-3005	Shenzhen Sungallon Rubber & Plastic Corporation Limited	TPE	Gallonprene®