Order Products : sales@su-jiao.com
EL-Lene™ H655JA
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | SCG Chemicals Co., Ltd. |
| Trademark: | EL-Lene™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RTgyME_EL-Lene-H655JA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| EL-Lene H655JA is a high density polyethylene resin with good processing performance and excellent mechanical properties. It is particularly designed for injection molding and compression molding of screw cap and closure. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.958 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.40 | g/10 min | ASTM D1238 |
| Molding Shrinkage | |||
| Flow : 2.00 mm | 3.6 | % | ASTM D955 |
| Across Flow : 2.00 mm | 2.6 | % | Internal Method |
| Environmental Stress-Cracking Resistance (50°C, 10% Igepal, Compression Molded, F50) | 400 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 66 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 27.5 | MPa | |
| Break | 34.3 | MPa | |
| Tensile Elongation 2(Break) | 1000 | % | ASTM D638 |
| Flexural Modulus | 1180 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 98 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -60.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 128 | °C | ASTM D1525 |
| Melting Temperature | 131 | °C | ASTM D2117 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 200 to 240 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 170 to 200 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYplex PMMA 700 | Polykemi AB | Acrylic (PMMA) | POLYplex |
| Starflex GM1210BA | LyondellBasell Industries | mLLDPE | Starflex |
| Avantra® 8130 | PMC Group Polymer Products | PS (HIPS) | Avantra® |
| Elastollan® S85AN | BASF Corp. Thermoplastic Polyurethanes | TPU-Polyester | Elastollan® |
| Sylvin 9067-90 YELLOW 460 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
