Order Products : sales@su-jiao.com
UNITIKA Nylon 6 M2350
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | UNITIKA Plastics Division |
| Trademark: | UNITIKA Nylon 6 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RS1w3B_UNITIKANylon6M2350.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Nano composite nylon |
| General Information | |
|---|---|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.15 | 1.15 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | |||
| Flow : 3.20mm | 0.80 | 0.80 | % | ASTM D955 |
| Transverse flow : 3.20mm | 1.0 | 1.0 | % | ASTM D955 |
| Water Absorption (Equilibrium, 23°C, 50%RH) | 2.8 | 2.8 | % |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Strength (Break) | 88.0 | 59.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 5.0 | 6.0 | % | ASTM D638 |
| Flexural Modulus | 4000 | 1700 | MPa | ASTM D790 |
| Flexural Strength | 140 | 72.0 | MPa | ASTM D790 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact | 44 | 210 | J/m | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, not annealed | 193 | -- | °C | ASTM D648 |
| 1.8 MPa, not annealed | 147 | -- | °C | ASTM D648 |
| CLTE - Flow | 6.3E-5 | 6.3E-5 | cm/cm/°C | ASTM D696 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRIMID® N6-200N | Polymer Technology and Services, LLC | Nylon 6 | TRIMID® |
| Next Nylon 6 Industrial Series NG15-02JBK | Next Polymers Ltd. | Nylon 6 | Next Nylon 6 Industrial Series |
| DECAL® 5431 | Synres-Almoco BV | Phenolic | DECAL® |
| INNOPOL® PP CS 2-9524 | Inno-Comp Ltd. | PP Copolymer | INNOPOL® PP |
| Sylvin 8215-60FUV White 1546 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
