Order Products : sales@su-jiao.com
POLYCOMPO PE 25100J
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | POLYCOMPO Co.,Ltd. |
| Trademark: | POLYCOMPO PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RRaM1c_POLYCOMPO-PE-25100J.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYCOMPO PE 25100J is a Linear Low Density Polyethylene product. It can be processed by injection molding and is available in Asia Pacific. Applications of POLYCOMPO PE 25100J include caps/lids/closures and containers. Primary characteristic: rigid. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 10 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (Injection Molded) | 200 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 57 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, Injection Molded | 9.70 | MPa | |
| Break, Injection Molded | 14.5 | MPa | |
| Tensile Strain (Break, Injection Molded) | 500 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 240 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 98.0 | °C | ASTM D1525, ISO 306 |
| Peak Crystallization Temperature (DSC) | 120 | °C | ASTM D3418, ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Santoprene™ 121-50E500 | ExxonMobil Chemical | TPV | Santoprene™ |
| ALCUDIA® EBA PA-20020 | REPSOL | EBA | ALCUDIA® EBA |
| DOKI® PS 678E | DIOKI d.d. | PS (GPPS) | DOKI® |
| Elastollan® LP 9307 | BASF Polyurethanes GmbH | TPU-Polyester | Elastollan® |
| SABIC® SUPEER™ 8318 | Saudi Basic Industries Corporation (SABIC) | mLLDPE | SABIC® SUPEER™ |
