Order Products : sales@su-jiao.com
KRATON® D1119 P
| Category: | SIS , Styrene Isoprene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RRXtM4_KRATON-D1119-P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1119 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below.
Kraton D1119 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.930 | g/cm³ | ASTM D4025 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 25 | g/10 min | |
| Antioxidant Additive | 0.080 to 0.30 | % | Internal Method |
| Ash Content | |||
| PSM | 2.5 to 5.0 | % | ISO 247 |
| T, Talc | 0.30 to 0.40 | % | Internal Method |
| Polystyrene Content | 21 to 24 | % | Internal Method |
| Total Extractables | < 1.0 | % | Internal Method |
| Volatile Matter | < 0.50 | % | Internal Method |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Diblock Content | 66.0 | ||
| Styrene/Rubber ratio | 22/78 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec, Compression Molded) | 30 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 1.10 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 2.41 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 1000 | % | ASTM D412 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultradur® S 4090 G2 | BASF Corporation | PBT+ASA | Ultradur® |
| Nycal™ 1820H Bk-1 | Technical Polymers, LLC | Nylon 6 | Nycal™ |
| ALTECH® ABS A 1000/172 UV | ALBIS PLASTIC GmbH | ABS | ALTECH® ABS |
| CYCOM® 5320-1 | Cytec Industries Inc. | Epoxy | CYCOM® |
| KIBIPOL® PR-040S | CHI MEI CORPORATION | IIR | KIBIPOL® |
