Order Products : sales@su-jiao.com
DOW™ HDPE 90057L
| Category: | HDPE , High Density Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | DOW™ HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RRFgho_DOW-HDPE-90057L.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DOW™ HDPE 90057L is a High Density Polyethylene Resin material. It is available in Latin America. Important attributes of DOW™ HDPE 90057L are:
Typical application of DOW™ HDPE 90057L: Food Contact Applications |
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.956 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.29 | g/10 min | |
| 190°C/21.6 kg | 27 | g/10 min |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 15 | µm | |
| Film Puncture Resistance (15 µm) | 5.60 | J/cm³ | Internal Method |
| Secant Modulus | ASTM D882 | ||
| 2% Secant, MD : 15 µm | 893 | MPa | |
| 2% Secant, TD : 15 µm | 1060 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 15 µm | 30.0 | MPa | |
| TD : Yield, 15 µm | 30.0 | MPa | |
| MD : Break, 15 µm | 41.0 | MPa | |
| TD : Break, 15 µm | 31.0 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Yield, 15 µm | 320 | % | |
| TD : Yield, 15 µm | 750 | % | |
| Dart Drop Impact (15 µm) | 50 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 15 µm | 5.0 | g | |
| TD : 15 µm | 47 | g |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 210 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 132.2 | RTP Company | PP Homopolymer | RTP |
| Scolefin 33 G 10-0 | Ravago Group | PP Homopolymer | Scolefin |
| AKROMID® B3 GM 10/20 natural (3691) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
| Dryflex® A1 602501 | ELASTO | SEBS | Dryflex® |
| Iupital® FX-11J | Mitsubishi Engineering-Plastics Corp | Acetal (POM) Copolymer | Iupital® |
