Order Products : sales@su-jiao.com
Kazan LDPE 16813-070 OKP 22 111 4103
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Kazanorgsintez Joint Stock Company |
| Trademark: | Kazan LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RQua0f_Kazan-LDPE-16813-070-OKP-22-111-4103.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GOST / TU: GOST 16337-77 LDPE is produced by means of polymerization of ethyiene under high pressure in tubular or stirred reactorwith the use of radical type initiator. LDPE is used for manufacturing of pipes, fittings, articles contacting with food, toys, films etc. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 0.917 to 0.920 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.0 | g/10 min | |
| Melt Flow - Dispersin within a batch 1 | < 15 | % |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Number of Inclusions | > 30.0 | ||
| Odor Rating | < 1.00 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress | |||
| Yield | > 90.0 | MPa | |
| Break | > 90.0 | MPa | |
| Tensile Strain (Break) | > 450 | % |
| Note Message | |
|---|---|
| 1 . | ± |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Santoprene™ 8291-85TL | ExxonMobil Chemical | TPV | Santoprene™ |
| Tenite™ Propionate 307A4000015 Clear, Trsp | Eastman Chemical Company | CAP | Tenite™ Propionate |
| UNISOFT TPE™ ST-50A-CL-1-01 | UNITED SOFT PLASTICS, Inc. | SEBS | UNISOFT TPE™ |
| CALIBRE™ 3503 | Trinseo | PC | CALIBRE™ |
| Monprene® CP-29353 NAT XRD1 (PRELIMINARY DATA) | Teknor Apex Company | TPE | Monprene® |
